How to build Snoopy pet robot: the whole process
18 steps to build Snoopy pet robot, from buying parts, printing and assembly to software, calibration and training, with the bill of materials, shop links and the offici…
Snoopy pet robot is a 300 mm, 3D-printable DIY pet robot with an ESP32, a 360-degree laser distance sensor, and a smartphone or tablet serving as a camera and display, plus ROS2-based autonomous navigation. The repository provides STL/3MF parts, Fusion 360 CAD files, and assembly, firmware, and setup guidance.
Buy parts
- Create a GitHub robot repository
Create a GitHub repository containing the robot description and follow the instructions above.
- Add the robot discovery hashtag
Open the repository, click About, and type the `kaia-ai-robot` tag. The robot will automatically appear in the list of robots compatible with the Kaia.ai software platform.
- Clone the descriptions repository
If necessary, clone the `kaia_descriptions` GitHub repository.
- Copy the starter template repository
Copy the `kaia_descriptions` GitHub repository as a starter template.
- Push the new repository to GitHub
Push the new repository to GitHub; the example assumes the GitHub username is `galaxy42`.
Print and make
- Print the Snoopy robot parts
Follow the 3D printing instructions to make the 300mm round base and other robot parts. The document says the design uses Fusion 360 and was printed with a Voron 2.4r2 350mm.
Assemble
- Keep multiple robots in one repository
If you have multiple robots, keep them in the same Git repository so they can be installed with a single command.
- Create and populate a ROS 2 meta-package
Create a ROS2 meta-package similar to `kaia_descriptions`, populate it with your robot description packages, and update its `package.xml` to include all descriptions.
- Choose a unique description prefix
Choose a unique prefix for the robot descriptions, such as your GitHub username.
- Rename and remove description packages
Rename the robot description packages to your own robot names and delete the description packages that will not be used.
- Edit package and build metadata
Edit each package's `package.xml` and `CMakeLists.txt`.
- Watch the Loki and Fido assembly video
Follow the assembly instructions video for the Loki and Fido models.
- Set up the Arduino ESP32 breakout board
Set up the Arduino ESP32 breakout board following the instructions video.
Software
- Build robot description packages individually
Run `colcon build` to compile the new robot description packages one by one.
- Set up the PC and upload firmware
Follow the one-time PC setup and firmware upload instructions video.
Calibrate and test
- Inspect the modified URDF model
Launch the URDF inspection tool with the robot description set to `waldo_description`.
- Monitor the robot in RViz2
Launch RViz2 with the robot description set to `waldo_description`.
- Perform initial robot bring-up
Complete the robot bring-up using the bring-up instructions video.