Connecting to sources…

How to build OpenLeg

4 steps to build OpenLeg, with the source documents.

OpenLeg is a fully open-source robotic leg intended for quadrupedal research and development. The repository provides the mechanical files, assembly guide, and V2 actuator source files needed to replicate OpenLeg, with critical mechanical and electrical assembly documented.

Print and make

  • Obtain OpenLeg V1 Files and Assembly Guide

    Access the files required to replicate OpenLeg V1 and use the accompanying assembly guide.

  • Access OpenLeg V1 SolidWorks Source Files

    Access the Full SolidWorks source files for OpenLeg V1 in `Hardware > OpenLeg_Assembly_Pack_and_Go.zip`.

  • Access OpenLeg V2 Actuator Source Files

    Access the OpenLeg V2 actuator source files in `Hardware > OpenLeg_V2_Actuator_Pack_and_Go.zip`. The source assembly is `Actuator_V1.SLDASM`.

Assemble

  • Assemble OpenLeg V1 Mechanically and Electrically

    Follow the assembly guide to complete the crucial mechanical and electrical assembly of OpenLeg V1.

Documents