How to build Spot Micro: the whole process
11 steps to build Spot Micro, from buying parts, printing and assembly to software, calibration and training, with the bill of materials, shop links and the official sou…
Spot Micro is a quadruped robot. This repository provides a beginner-friendly guide with 3D-printing files, a complete hardware materials list, assembly guidance, and software for testing, calibration, and operation.
Buy parts
- Purchase the robot hardware
Buy the required hardware from the document's bill of materials, preferably using exactly the same hardware as the author.
- Purchase the remaining hardware items
Print and make
- Print the provided 3D files
Assemble
- Assemble the designed hardware
Connect the designed hardware with wires or wireless signals and assemble the components.
Software
- Connect the computer to the robot computer
Try to establish communication between your control computer and the robot's computer.
- Command the hardware through the robot computer
Send simple control instructions to the hardware through the robot computer.
- Obtain the software code
Calibrate and test
- Run the software tests
- Calibrate the robot
Use it
- Make the robot move
After connecting and assembling the hardware, make the robot move using commands from the computer.
- Run the robot software