How to build CUBOTino
6 steps to build CUBOTino, with the source documents.
CUBOTino is a small, simple, 3D-printed, inexpensive robot that solves a Rubik's cube. The repository provides printable parts and a PDF build guide covering assembly, servo setup, and presenting the cube to the webcam.
Print and make
- 3D Print Without Support
Print the robot parts without support.
Assemble
- Set Servos to Mid Position
Set the servos to their mid position.
- Check Rotating Base Servo Range
The servo for the rotating base (cube_holder) must have at least 190-degree rotation; if not, check the instructions for how to proceed.
Software
- Update RubikTwoPhase Solver
If you use macOS or Ubuntu, update the RubikTwoPhase solver to v1.1.1, released on 16 November 2022.
Calibrate and test
- Verify 180-Degree Servo Range
Verify that the servos have a 180-degree range.
- Present the Cube to the Webcam
Follow the video tutorial to present the cube to the webcam.