How to build open-quadruped
5 steps to build open-quadruped, with the source documents.
An open-source 3D-printed quadruped with 12-DOF Bézier-curve gait generation and six-axis body-pose manipulation. The repository provides STEP and STL models for the physical build, a bill of materials, build guidance, Gerber files for a custom 12-servo controller, and ROS and Gazebo simulation resources.
Software
- Install visualization dependencies
Install the libraries required to run the visualization tool; the document states that matplotlib 3.0.3 is supported.
- Run the animate.py visualizer
Run the visualization/animate.py Python file in the repository to try the visualization tool.
Calibrate and test
- Reset the robot position
Press “1” on the keyboard to reset the position. If the robot enters an impossible pose that causes collisions and behaves strangely, press “1” to reset it.
Use it
- Select the robot axis
Use x, y, z, a, p, and r to select the x axis, y axis, z axis, yaw, pitch, and roll.
- Increment the selected position
Use the keyboard up and down buttons to increment or decrease the position of the selected axis.
Common problems
- Setup documentation and website guidance remain incomplete. #5
- ROS Melodic dependency installation lacks reliable commands and instructions. #2
- Assembly guide lacks belt-tensioning steps. #9
- Servo boot reference pose and alignment method are undocumented. #10
- Parts list and bill of materials links are broken. #14 #16
- Pulley and idler CAD files are missing or unclear. #6 #15
- Downloads fail without a stated cause or working alternative link. #12
- It remains unclear how to control the robot after launching Gazebo. #13