Connecting to sources…

How to build BamBot (bambot-b0)

8 steps to build BamBot (bambot-b0), with the source documents.

The creator's BOM totals about $300 / about €300 / about CN¥2,000 (15 12V STS3215 servos at about $15 each, a servo driver board, three 4-inch omni wheels, screws and cables); the creator's estimate, excluding 3D printing, a 20,000 mAh power bank, the computer and camera, and the teleoperation leader arms (another 12 servos and a driver board)

Bill of materials · Parts for one bambot

PartQtyUSCNEU
STS3215 Servo (12V version)15USD 15CNY 99
Motor Control Board1USD 11CNY 27
4" Omni wheels3USD 9.99CNY 28EUR 24.5
M2 M3 M4 Assorted Screw Set1USD 14.99CNY 20EUR 23.5
Long 5264 wires2CNY 20
Type C to DC wire(12V/5V)1CNY 20

Buy parts

  • Gather the Electronic Components

    Gather the electronic components for one Bambot; the basic combination is one SO-100 arm, one LeKiwi, and some additional cables.

  • Prepare Extra Teleoperation Parts

    Prepare 12 STS3215 servos, one motor control board, two 1000 mm 5264 wires, one Type C-to-DC wire, and another PC.

  • Gather the Required Tools

    Prepare a 20000mAH power bank with a Type C port supporting USB PD, either a MacBook with an iPhone or a PC with a camera module, and a screwdriver.

Print and make

  • Download Printable Model Files

    Download the 3D-printable STL or 3MF files from the Bambot releases page.

  • Print the Bambot Body

    3D print the body part of Bambot.

Assemble

  • Explore the TinkerCAD Model

    Explore Bambot's parts and assembly process in an interactive 3D environment.

  • Assemble Bambot

    After all 3D-printed parts and electronic components are ready, begin assembling Bambot.

Use it

  • Start Using Bambot

    Use the lerobot-bambot repository and follow its guide to begin playing with Bambot.

Common problems

  • The BOM omits the 12V servo power supply and cable #2
  • Missing arm STL files make the correct print selection unclear #6
  • Robot serial setup reports permission or joint errors #10 #13
  • The assembled robot wobbles and remains unstable #5
  • Robot models lack shadows, causing incorrect rendering #11

Parts

  • 15 STS3215 servos: six per arm (base rotation, shoulder, elbow, wrist pitch, wrist roll, gripper) plus three for the wheels; the creator uses the 12V version (30 kg·cm stall torque) and says the 7.4V version is enough but needs a battery
  • One servo driver board (Waveshare), shared by both arms and the three wheels
  • Three 4-inch omni wheels (VEX; the China link is an 80 mm version)
  • M2/M3/M4 screw set, two long 5264 leads, a USB‑C to DC cable (12V/5V); powered by a 20,000 mAh USB PD power bank
  • 3D prints: body, neck, base, left and right arm mounts, wheel couplings, clips and more (the releases hold STLs and 3MFs tested on a Bambu Lab P1P)
  • Teleoperation leader arms (extra): 12 STS3215 servos, a driver board, two 1 m 5264 leads, a USB‑C to DC cable and a second computer

Tools

  • 3D printer or a printing service
  • Screwdriver
  • A MacBook and an iPhone, or a PC with a camera module

Skills

  • Python and LeRobot: follow the LeKiwi docs and set the 15 servo IDs from the diagram
  • During calibration both arms must be posed identically at the same time
  • Optional: keyboard, leader-arm or LLM chat control on bambot.org

Software

  • lerobot-bambot: the creator's LeRobot fork (Apache‑2.0, last updated 2025‑03‑25)
  • bambot.org: browser simulation and real-robot control (URDF + Web Serial), plus an SO‑101 assembly and calibration guide
  • feetech.js 0.1.2: a browser SDK for Feetech servos (npm)

Documents