{"title":"Open-source robot build costs","description":"Every build guide on BotEdu: what the robot is for, its level, the cost its makers or sellers record (with what the figure covers), how many steps the guide has, the regions its parts table prices, its reproducibility score (0-100, out of the points that apply to its kind) and whether it is ready to build.","publisher":"BotEdu","url":"https://botedu.ai/en/data","license":{"name":"CC BY 4.0","url":"https://creativecommons.org/licenses/by/4.0/"},"citation":"BotEdu (2026). Open-source robot build costs and part prices [Data set]. https://botedu.ai/en/data. Licensed under CC BY 4.0.","updated":"2026-11-21","columns":["id","name_en","name_zh","goal","level","kind","cost_amount","cost_currency","cost_basis","cost_note","guide_steps","guide_stages","parts_price_regions","score","ready_to_build","score_gaps","license","hardware_license","software_license","project_url","botedu_url"],"rows":[{"id":"so101","name_en":"SO‑101 arm","name_zh":"SO‑101 机械臂","goal":"manipulation","level":"starter","kind":"open-hardware","cost_amount":229.88,"cost_currency":"USD","cost_basis":"bom","cost_note":"About $229.88 (≈CN¥1,343) for a leader+follower pair; about $121.94 for a follower only. Printing and shipping excluded","guide_steps":255,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"US EU CN JP","score":100,"ready_to_build":"yes","score_gaps":"","license":"Apache-2.0","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/TheRobotStudio/SO-ARM100","botedu_url":"https://botedu.ai/en/builds/so101"},{"id":"lekiwi","name_en":"LeKiwi","name_zh":"LeKiwi","goal":"mobile-manipulation","level":"intermediate","kind":"open-hardware","cost_amount":482,"cost_currency":"USD","cost_basis":"bom","cost_note":"About $482 for the 12V version with the SO‑101 teleoperation set; base only about $251.5; wired base about $184 (repo BOM, US prices)","guide_steps":230,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"US EU CN","score":95,"ready_to_build":"yes","score_gaps":"guide.video","license":"Apache-2.0","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/SIGRobotics-UIUC/LeKiwi","botedu_url":"https://botedu.ai/en/builds/lekiwi"},{"id":"xlerobot","name_en":"XLeRobot","name_zh":"XLeRobot","goal":"mobile-manipulation","level":"intermediate","kind":"open-hardware","cost_amount":660,"cost_currency":"USD","cost_basis":"","cost_note":"Basic build (laptop plus single RGB head camera) about $660 or CN¥3,999, excluding printing, tools, shipping and tax. Options: stereo camera +$30, Raspberry Pi +$79, RealSense +$220","guide_steps":77,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":90,"ready_to_build":"yes","score_gaps":"parts.prices","license":"Apache-2.0","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/Vector-Wangel/XLeRobot","botedu_url":"https://botedu.ai/en/builds/xlerobot"},{"id":"phonebot","name_en":"PhoneBot","name_zh":"PhoneBot","goal":"biped","level":"intermediate","kind":"open-hardware","cost_amount":400,"cost_currency":"USD","cost_basis":"estimate","cost_note":"Hardware about $400 excluding the smartphone (project page)","guide_steps":5,"guide_stages":"assemble print source","parts_price_regions":"","score":28,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.steps guide.software guide.pictures guide.video parts.list parts.shops licence.software","license":"CC BY-NC 4.0（CAD、物料表与文档）","hardware_license":"CC BY-NC 4.0","software_license":"","project_url":"https://phonebot.dev/","botedu_url":"https://botedu.ai/en/builds/phonebot"},{"id":"toddlerbot","name_en":"ToddlerBot","name_zh":"ToddlerBot","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Total cost not stated; BOM provided as a link","guide_steps":32,"guide_stages":"calibrate data software use","parts_price_regions":"","score":35,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices cost.cost guide.assembly guide.pictures guide.video parts.list parts.shops","license":"MIT（代码）· CC BY-NC-SA 4.0（设计文件）","hardware_license":"CC BY-NC-SA 4.0","software_license":"MIT","project_url":"https://github.com/hshi74/toddlerbot","botedu_url":"https://botedu.ai/en/builds/toddlerbot"},{"id":"bhl","name_en":"Berkeley Humanoid Lite","name_zh":"Berkeley Humanoid Lite","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":5000,"cost_currency":"USD","cost_basis":"estimate","cost_note":"Described as under $5,000 in total; no itemised list","guide_steps":81,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":70,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices","license":"MIT（代码）· CC BY-SA 4.0（其他资产）","hardware_license":"CC BY-SA 4.0","software_license":"MIT","project_url":"https://github.com/HybridRobotics/Berkeley-Humanoid-Lite","botedu_url":"https://botedu.ai/en/builds/bhl"},{"id":"bittle","name_en":"Petoi Bittle X","name_zh":"Petoi Bittle X","goal":"quadruped","level":"starter","kind":"kit","cost_amount":319,"cost_currency":"USD","cost_basis":"product","cost_note":"Bittle X $319, Bittle $289 (vendor page)","guide_steps":146,"guide_stages":"assemble calibrate software use","parts_price_regions":"","score":91,"ready_to_build":"no","score_gaps":"licence.software","license":"OpenCat 开源平台（许可证官网未写）","hardware_license":"","software_license":"","project_url":"https://github.com/PetoiCamp/OpenCat","botedu_url":"https://botedu.ai/en/builds/bittle"},{"id":"duckiebot","name_en":"Duckiebot","name_zh":"Duckiebot","goal":"mobile","level":"starter","kind":"kit","cost_amount":429,"cost_currency":"USD","cost_basis":"product","cost_note":"Duckiebot DB‑J from $429, starter kit from $512; camera $19, encoder motor $10, battery $69 sold separately (store)","guide_steps":23,"guide_stages":"source","parts_price_regions":"","score":56,"ready_to_build":"no","score_gaps":"guide.assembly guide.software guide.video licence.software","license":"官网称开放研究平台；软件许可证页未展开","hardware_license":"","software_license":"","project_url":"https://get.duckietown.com/","botedu_url":"https://botedu.ai/en/builds/duckiebot"},{"id":"turtlebot4","name_en":"TurtleBot 4","name_zh":"TurtleBot 4","goal":"mobile","level":"intermediate","kind":"kit","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Price not on the page checked","guide_steps":151,"guide_stages":"assemble calibrate data software source use","parts_price_regions":"","score":56,"ready_to_build":"no","score_gaps":"cost.cost guide.video licence.software","license":"ROS 2 软件栈；硬件许可证未写","hardware_license":"","software_license":"","project_url":"https://turtlebot.github.io/turtlebot4-user-manual/","botedu_url":"https://botedu.ai/en/builds/turtlebot4"},{"id":"reachy-mini","name_en":"Reachy Mini","name_zh":"Reachy Mini","goal":"companion","level":"starter","kind":"kit","cost_amount":399,"cost_currency":"USD","cost_basis":"product","cost_note":"Lite $399 (needs a computer), Wireless $499 (on-board compute), currency not stated; lead time up to 90 days","guide_steps":159,"guide_stages":"assemble calibrate data software source use","parts_price_regions":"","score":100,"ready_to_build":"no","score_gaps":"","license":"Apache-2.0","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/pollen-robotics/reachy_mini","botedu_url":"https://botedu.ai/en/builds/reachy-mini"},{"id":"microduck","name_en":"Microduck","name_zh":"Microduck","goal":"biped","level":"intermediate","kind":"open-hardware","cost_amount":2443,"cost_currency":"CNY","cost_basis":"bom","cost_note":"Feetech HD-1910 community replica, about CN¥2,443: the BOM's own total is CN¥2,426.88 (printed parts CN¥139 as a set, 15 servos CN¥1,425, Radxa Zero 3W CN¥309) plus a CN¥16 sole pad the total leaves out; shipping excluded. Official robot $399 pre-order before tax and shipping","guide_steps":93,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":80,"ready_to_build":"yes","score_gaps":"files.print files.cad","license":"Community replica: drawings and documents CC BY-NC-SA 4.0 (non-commercial), replica code Apache-2.0; official software Apache-2.0","hardware_license":"CC BY-NC-SA 4.0","software_license":"Apache-2.0","project_url":"https://github.com/fanhao375/microduck-replica","botedu_url":"https://botedu.ai/en/builds/microduck"},{"id":"stackchan","name_en":"Stack-chan","name_zh":"Stack-chan（ｽﾀｯｸﾁｬﾝ）","goal":"companion","level":"starter","kind":"open-hardware","cost_amount":99,"cost_currency":"USD","cost_basis":"product","cost_note":"Assembled M5StackChan $99, $125 with remote (M5Stack store); JP¥18,590 incl. tax at Switch Science. DIY reference: CoreS3 $59.90 and StackChan Body $55 (M5Stack store), SCS0009 servo JP¥1,738 (Switch Science); the repo puts SG90 at about JP¥500 and RS304MD at about JP¥3,000. Printing, PCB, battery and shipping excluded","guide_steps":177,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":89,"ready_to_build":"yes","score_gaps":"parts.prices","license":"Apache-2.0","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/stack-chan/stack-chan","botedu_url":"https://botedu.ai/en/builds/stackchan"},{"id":"xiaozhi","name_en":"XiaoZhi AI (xiaozhi-esp32)","name_zh":"小智 AI（xiaozhi-esp32）","goal":"companion","level":"starter","kind":"software-open","cost_amount":21.5,"cost_currency":"USD","cost_basis":"product","cost_note":"Ready boards from $21.50: AtomS3R AI Chatbot Kit $21.50, CoreS3 $59.90 (M5Stack store), SenseCAP Watcher for XiaoZhi $49.90 (Seeed); shipping excluded. The breadboard BOM lives in a Feishu wiki that was not checked","guide_steps":263,"guide_stages":"assemble calibrate software source use","parts_price_regions":"","score":100,"ready_to_build":"no","score_gaps":"","license":"MIT","hardware_license":"","software_license":"MIT","project_url":"https://github.com/78/xiaozhi-esp32","botedu_url":"https://botedu.ai/en/builds/xiaozhi"},{"id":"electronbot","name_en":"ElectronBot","name_zh":"ElectronBot","goal":"companion","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No total for the original; the README puts nylon prints (JLC 3D) at about CN¥200–300. The community ESP32 AI version's docs estimate CN¥300–600 and its OSHWHub page about CN¥300. Tools and shipping excluded","guide_steps":42,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":67,"ready_to_build":"no","score_gaps":"files.print parts.prices cost.cost","license":"GPL-3.0（原版）· CC BY-SA 4.0（社区 electronBot-AI 硬件）","hardware_license":"GPL-3.0","software_license":"GPL-3.0","project_url":"https://github.com/peng-zhihui/ElectronBot","botedu_url":"https://botedu.ai/en/builds/electronbot"},{"id":"otto","name_en":"Otto (Otto DIY / HP Robots Otto)","name_zh":"Otto（Otto DIY / HP Robots Otto）","goal":"biped","level":"starter","kind":"kit","cost_amount":161.2,"cost_currency":"USD","cost_basis":"kit","cost_note":"HP Robots Otto Starter Builder Kit $161.20 (RobotShop US, 2026‑10‑25, before tax and shipping); HP shows no price and the original DIY BOM cost is not stated","guide_steps":54,"guide_stages":"assemble calibrate software source use","parts_price_regions":"","score":89,"ready_to_build":"no","score_gaps":"guide.video","license":"CC BY-SA（Printables 3D 模型）· GPL-3.0（OttoDIYLib）","hardware_license":"CC BY-SA","software_license":"GPL-3.0","project_url":"https://github.com/OttoDIY/OttoDIYLib","botedu_url":"https://botedu.ai/en/builds/otto"},{"id":"shanmao-otto","name_en":"Shanmao AI desktop humanoid (Otto-based)","name_zh":"闪猫侠 AI 桌面人形机器人（Otto 衍生）","goal":"biped","level":"intermediate","kind":"open-hardware","cost_amount":200,"cost_currency":"CNY","cost_basis":"estimate","cost_note":"The BOM page estimates CN¥200–500 depending on sourcing and part quality; OSHWHub says about CN¥150; kit price not checked. 3D printer excluded","guide_steps":204,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":61,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.video","license":"CC BY-NC-SA 4.0（硬件）· MIT（固件与文档）","hardware_license":"CC BY-NC-SA 4.0","software_license":"MIT","project_url":"https://github.com/txp666/ottodiy-docs","botedu_url":"https://botedu.ai/en/builds/shanmao-otto"},{"id":"vector","name_en":"Vector 2.0","name_zh":"Vector 2.0","goal":"companion","level":"starter","kind":"software-open","cost_amount":249.99,"cost_currency":"USD","cost_basis":"product","cost_note":"Vector 2.0 $249.99 (anki.bot, open-box from $189.99); wire-pod is free and replaces the official subscription from $11.99/month","guide_steps":140,"guide_stages":"calibrate software source use","parts_price_regions":"","score":75,"ready_to_build":"no","score_gaps":"guide.pictures guide.video","license":"MIT（wire-pod）","hardware_license":"","software_license":"MIT","project_url":"https://github.com/kercre123/wire-pod","botedu_url":"https://botedu.ai/en/builds/vector"},{"id":"doly","name_en":"Doly","name_zh":"Doly","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":359,"cost_currency":"USD","cost_basis":"kit","cost_note":"3D Maker Edition 1GB $359, 2GB $379 (electronics, battery, charging station and microSD included; print the shell yourself); assembled from $399 (shop.doly.ai USD prices, before tax and shipping)","guide_steps":51,"guide_stages":"assemble print software source","parts_price_regions":"","score":83,"ready_to_build":"yes","score_gaps":"parts.prices parts.shops","license":"CC BY-NC-SA 4.0","hardware_license":"CC BY-NC-SA 4.0","software_license":"CC BY-NC-SA 4.0","project_url":"https://github.com/robotdoly/DOLY-DIY","botedu_url":"https://botedu.ai/en/builds/doly"},{"id":"thymio","name_en":"Thymio (Thymio II / Wireless Thymio)","name_zh":"Thymio（Thymio II / Wireless Thymio）","goal":"mobile","level":"starter","kind":"kit","cost_amount":300,"cost_currency":"AUD","cost_basis":"product","cost_note":"Thymio Wireless AUD 300.00, Thymio USB AUD 241.00 (Tribotix, 2026‑10‑31, before GST and shipping); Mobsya shows no price and the hardware repos give no BOM cost","guide_steps":159,"guide_stages":"assemble calibrate software source use","parts_price_regions":"","score":78,"ready_to_build":"no","score_gaps":"guide.pictures guide.video","license":"CC BY-SA 3.0（硬件）· LGPL-3.0（固件、Aseba 与 Thymio Suite）","hardware_license":"CC BY-SA 3.0","software_license":"LGPL-3.0","project_url":"https://github.com/Mobsya/aseba","botedu_url":"https://botedu.ai/en/builds/thymio"},{"id":"mini-pupper","name_en":"Mini Pupper 2","name_zh":"Mini Pupper 2","goal":"quadruped","level":"intermediate","kind":"kit","cost_amount":649,"cost_currency":"USD","cost_basis":"kit","cost_note":"Pre-assembled kit $649, legs-pre-assembled kit $604, upgrade kit $399 (mangdang.store, 2026‑10‑31; the page says taxes included, shipping extra); the manual puts shipping to most of North America, Japan, the EU and UK within $30 with duties paid. No self-sourced total for Mini Pupper 2","guide_steps":94,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":100,"ready_to_build":"no","score_gaps":"","license":"Apache-2.0（mini_pupper / mini_pupper_ros / mini_pupper_2_bsp；BSP 中 FuelGauge 为 GPL）· 硬件文件未声明许可证","hardware_license":"","software_license":"Apache-2.0","project_url":"https://github.com/mangdangroboticsclub/mini_pupper_2_bsp","botedu_url":"https://botedu.ai/en/builds/mini-pupper"},{"id":"esp-sparkbot","name_en":"ESP-SparkBot","name_zh":"ESP-SparkBot","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":79,"cost_currency":"USD","cost_basis":"kit","cost_note":"Not sold by Espressif, and OSHWHub gives no BOM or build cost; third-party Tindie seller innoelement lists a kit at $79 and an assembled unit at $108 (2026‑10‑31, before shipping; the page says Espressif does not supply it and two reviews report non-delivery); individual Taobao sellers' prices not checked","guide_steps":232,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":61,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.video","license":"Apache-2.0（Gitee 固件与 3D 文件、组件库 BSP）· GPL 3.0（立创开源硬件）","hardware_license":"GPL 3.0","software_license":"Apache-2.0","project_url":"https://github.com/78/xiaozhi-esp32","botedu_url":"https://botedu.ai/en/builds/esp-sparkbot"},{"id":"sesame","name_en":"Sesame Robot (Sesame Robot Project)","name_zh":"Sesame 开源四足机器人（Sesame Robot Project）","goal":"quadruped","level":"intermediate","kind":"open-hardware","cost_amount":50,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The README puts hardware at about $50–60 with access to a 3D printer; filament, tools and shipping excluded. FCE's complete kit is $100 and the electronics kit $85 (both sold out on 2026‑10‑31)","guide_steps":286,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":89,"ready_to_build":"yes","score_gaps":"parts.prices","license":"Apache-2.0","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/dorianborian/sesame-robot","botedu_url":"https://botedu.ai/en/builds/sesame"},{"id":"pib","name_en":"pib (printable intelligent bot)","name_zh":"pib（printable intelligent bot）","goal":"biped","level":"intermediate","kind":"open-hardware","cost_amount":3145,"cost_currency":"EUR","cost_basis":"kit","cost_note":"Non-printed parts kit pib#5.Makerbox from €3,145.00 (pib.Shop, 2026‑10‑31, including VAT, excluding shipping); the FAQ puts PETG filament at about €200–250. Parts can also be sourced from the Onshape BOM","guide_steps":61,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":75,"ready_to_build":"no","score_gaps":"files.cad parts.prices parts.shops","license":"AGPL-3.0（官网 FAQ：硬件、CAD 与软件）· GitHub pib-stls 声明 GPL-3.0 · pib_Advanced-stls 未声明","hardware_license":"AGPL-3.0","software_license":"AGPL-3.0","project_url":"https://github.com/pib-rocks/pib-stls","botedu_url":"https://botedu.ai/en/builds/pib"},{"id":"pupper-v3","name_en":"Stanford Pupper v3","name_zh":"Stanford Pupper v3","goal":"quadruped","level":"advanced","kind":"open-hardware","cost_amount":2000,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The docs put a self-build at about $2000; the BOM sheet totals about $2,158.91 (minimum $1,785.91, of which 12 GIM4305 joints are about $1,320). Present Perfection full kit $3,400, assembled $3,800 (2026‑10‑31, before tax and shipping)","guide_steps":105,"guide_stages":"assemble calibrate data software source use","parts_price_regions":"","score":55,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.pictures guide.video licence.hardware","license":"GPL-3.0（pupperv3-monorepo、pupperv3-mjx）· MIT（pupper_v3_description）· 硬件 CAD/PCB 未声明许可证","hardware_license":"","software_license":"GPL-3.0","project_url":"https://github.com/Nate711/pupperv3-monorepo","botedu_url":"https://botedu.ai/en/builds/pupper-v3"},{"id":"dummy-robot","name_en":"Dummy-Robot","name_zh":"Dummy-Robot（Dummy 机械臂）","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No total in the README; the original's harmonic reducers were bought second-hand at about CN¥600 each, with a CNC aluminium frame. The README's planned 3D-printed “Youth Edition” targets under CN¥2,000 and has not been released","guide_steps":22,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":44,"ready_to_build":"no","score_gaps":"files.print parts.prices cost.cost guide.video parts.shops licence.hardware licence.software","license":"未声明（GitHub 仓库无许可证文件）","hardware_license":"","software_license":"","project_url":"https://github.com/peng-zhihui/Dummy-Robot","botedu_url":"https://botedu.ai/en/builds/dummy-robot"},{"id":"inmoov","name_en":"InMoov","name_zh":"InMoov","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No total is published. The BOM page (marked updated 2016‑05‑04) lists some reference prices: two Arduino Megas €80, ten HK15298B hand servos €180, two MG996R wrist servos €22, eight HS805BB arm servos €240, a 6V 12Ah battery and charger €35; other servos, the computer, sensors and filament are not priced","guide_steps":51,"guide_stages":"assemble calibrate software source use","parts_price_regions":"","score":50,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices cost.cost guide.video","license":"CC BY-NC 3.0（3D 部件，非商业）· Apache-2.0（MyRobotLab 与 InMoov2）","hardware_license":"CC BY-NC 3.0","software_license":"Apache-2.0","project_url":"https://github.com/MyRobotLab/myrobotlab","botedu_url":"https://botedu.ai/en/builds/inmoov"},{"id":"turtlebot3","name_en":"TurtleBot3 (Burger / Waffle Pi)","name_zh":"TurtleBot3（Burger / Waffle Pi）","goal":"mobile","level":"intermediate","kind":"kit","cost_amount":783.5,"cost_currency":"USD","cost_basis":"kit","cost_note":"Burger (Raspberry Pi 4 4GB) $783.50, Waffle Pi (Raspberry Pi 4 2GB) $1,908.31 and (4GB) $1,933.61 (robotis.us, 2026‑10‑31, all shown in stock; shipping calculated at checkout, tax not mentioned); kits include the Pi, lidar, battery, charger and power supply, and no self-sourced BOM total is given","guide_steps":217,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":100,"ready_to_build":"no","score_gaps":"","license":"Apache-2.0（ROS 2 软件包、OpenCR 固件、DYNAMIXEL SDK）· 未声明许可证（OpenCR 硬件文件、Onshape CAD）","hardware_license":"","software_license":"Apache-2.0","project_url":"https://github.com/ROBOTIS-GIT/turtlebot3","botedu_url":"https://botedu.ai/en/builds/turtlebot3"},{"id":"openmanipulator-x","name_en":"OpenMANIPULATOR-X (RM-X52-TNM)","name_zh":"OpenMANIPULATOR-X（RM-X52-TNM）","goal":"manipulation","level":"intermediate","kind":"kit","cost_amount":1629.09,"cost_currency":"USD","cost_basis":"kit","cost_note":"Full kit $1,629.09 (robotis.us, 2026‑10‑31, shown in stock, 2–3 week lead time; shipping calculated at checkout, tax not mentioned), without power supply or controller: the DYNAMIXEL Starter Set at $68.66 or an OpenCR1.0 at $247.14, and the Base Plate‑02 at $206.66, are extra; a frame set without servos is $314.76. No self-sourced BOM total is given","guide_steps":9,"guide_stages":"assemble print software source","parts_price_regions":"","score":82,"ready_to_build":"no","score_gaps":"guide.steps guide.pictures","license":"Apache-2.0（open_manipulator、OpenCR 固件、DYNAMIXEL SDK）· 未声明许可证（Onshape 3D CAD）","hardware_license":"","software_license":"Apache-2.0","project_url":"https://github.com/ROBOTIS-GIT/open_manipulator","botedu_url":"https://botedu.ai/en/builds/openmanipulator-x"},{"id":"openbot","name_en":"OpenBot (open-source smartphone robot car)","name_zh":"OpenBot（手机驱动的开源小车）","goal":"mobile","level":"intermediate","kind":"open-hardware","cost_amount":50,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The README puts the body at about $50 (bring your own phone); the BOM links to Amazon and AliExpress with no total. The RTR‑520 four-pack on Amazon US was unavailable with no offer on 2026‑10‑31; the RTR‑TT link goes to Taobao and was not checked","guide_steps":687,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":89,"ready_to_build":"yes","score_gaps":"parts.prices","license":"MIT（整个仓库：App、固件、控制器、Playground、训练代码与车体 STL/STEP、PCB 文件；未另行声明硬件许可证）","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/ob-f/OpenBot","botedu_url":"https://botedu.ai/en/builds/openbot"},{"id":"pidog","name_en":"SunFounder PiDog (V1 / V2)","name_zh":"SunFounder PiDog 树莓派机器狗（V1 / V2）","goal":"quadruped","level":"intermediate","kind":"software-open","cost_amount":179.99,"cost_currency":"USD","cost_basis":"product","cost_note":"$179.99 (SunFounder store, 2026‑10‑31, priced in USD, no discount); the page offers free shipping (extra in some areas) from China, leaves import duty to the buyer and does not say whether tax is included. Raspberry Pi, microSD card and charger are not included","guide_steps":55,"guide_stages":"assemble calibrate software source use","parts_price_regions":"","score":100,"ready_to_build":"no","score_gaps":"","license":"GPL-2.0（pidog、vilib、sunfounder-controller）· GPL-3.0（robot-hat）· 硬件设计未公开","hardware_license":"","software_license":"GPL-2.0","project_url":"https://github.com/sunfounder/pidog","botedu_url":"https://botedu.ai/en/builds/pidog"},{"id":"nybble","name_en":"Petoi Nybble Q robot cat (Nybble line)","name_zh":"Petoi Nybble Q 机器猫（Nybble 系列）","goal":"quadruped","level":"starter","kind":"software-open","cost_amount":435,"cost_currency":"USD","cost_basis":"product","cost_note":"Nybble Q pre-assembled: cream with Lite servos $435.00, cream with alloy servos $515.00 (in stock), white with Lite servos $435.00 (sold out) (Petoi store, USD, 2026‑10‑31). The page does not say whether tax is included; US orders ship free from $200, international orders free from $500 or from $15 otherwise, customs charges paid by the buyer","guide_steps":31,"guide_stages":"calibrate software source use","parts_price_regions":"","score":75,"ready_to_build":"no","score_gaps":"guide.pictures guide.video","license":"MIT（OpenCatEsp32 与 OpenCat 固件、ros_opencat）· STL 外壳文件未声明许可证 · BiBoard 电路未公开","hardware_license":"","software_license":"MIT","project_url":"https://github.com/PetoiCamp/OpenCatEsp32-Quadruped-Robot","botedu_url":"https://botedu.ai/en/builds/nybble"},{"id":"freenove-dog","name_en":"Freenove Robot Dog Kit for Raspberry Pi (FNK0050)","name_zh":"Freenove 树莓派机器狗套件（FNK0050）","goal":"quadruped","level":"intermediate","kind":"software-open","cost_amount":129.99,"cost_currency":"USD","cost_basis":"product","cost_note":"FNK0050 $129.99 (Freenove store, USD, 2026‑10‑31, in stock, free standard shipping, customs duties and VAT may apply); the Raspberry Pi, two 18650 cells and a charger are extra and not priced by Freenove","guide_steps":220,"guide_stages":"assemble calibrate software source","parts_price_regions":"","score":100,"ready_to_build":"no","score_gaps":"","license":"CC BY-NC-SA 3.0（代码与教程，非商业）· 硬件设计文件未发布","hardware_license":"","software_license":"CC BY-NC-SA 3.0","project_url":"https://github.com/Freenove/Freenove_Robot_Dog_Kit_for_Raspberry_Pi","botedu_url":"https://botedu.ai/en/builds/freenove-dog"},{"id":"rebot-devarm","name_en":"reBot Arm B601 (reBot-DevArm, B601-DM)","name_zh":"reBot Arm B601（reBot-DevArm，B601-DM 达妙版）","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":1499,"cost_currency":"USD","cost_basis":"product","cost_note":"Seeed official: the pre-assembled B601‑DM is $1,499; unassembled, a motor kit at $829, a structure kit at $169 and a gripper kit at $199; none include the power supply (adapter kit $59) or G-clamps (2026‑10‑31; the page does not say whether tax or shipping is included). BOM reference prices: DM4310 $120 each ×4, DM4340P $175 each ×3, CAN‑USB board $15, printed parts about $50 on average, CNC parts about $250 on average; the README gives no total","guide_steps":477,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":90,"ready_to_build":"yes","score_gaps":"files.print","license":"CERN-OHL-W-2.0（硬件与文档）· Apache-2.0（软件，据 README 与 OSHWA）· MIT（MotorBridge）","hardware_license":"CERN-OHL-W-2.0","software_license":"Apache-2.0","project_url":"https://github.com/Seeed-Projects/reBot-DevArm","botedu_url":"https://botedu.ai/en/builds/rebot-devarm"},{"id":"mycobot-280","name_en":"myCobot 280 Pi (myCobot 280 Raspberry Pi 2023)","name_zh":"myCobot 280 树莓派版（myCobot 280 Pi 2023）","goal":"manipulation","level":"starter","kind":"software-open","cost_amount":799,"cost_currency":"USD","cost_basis":"product","cost_note":"myCobot 280 Pi 2023 alone $799 (Elephant Robotics international store, 2026‑10‑31; shipping, applicable taxes and tariffs extra); with a base from $858, with a flat base and adaptive gripper $978. The hardware is closed, so there is no BOM cost","guide_steps":139,"guide_stages":"assemble calibrate data software use","parts_price_regions":"","score":90,"ready_to_build":"no","score_gaps":"guide.video","license":"MIT（pymycobot）· BSD-3-Clause（mycobot_ros）· BSD-2-Clause（mycobot_ros2 的 mycobot_280 各包）· 硬件与固件未开源","hardware_license":"","software_license":"MIT","project_url":"https://github.com/elephantrobotics/pymycobot","botedu_url":"https://botedu.ai/en/builds/mycobot-280"},{"id":"hopejr","name_en":"HopeJR (HOPEJr)","name_zh":"HopeJR（HOPEJr）","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No official price or BOM total: Arm/BOM.md lists parts and shop links without prices. A Hugging Face blog post (2026‑09‑25) puts the LeRobot-integrated arm and hand at around €500; the HF CEO's 2025‑05‑29 post says $3,000 for the full robot, but there is no order page","guide_steps":110,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":80,"ready_to_build":"no","score_gaps":"parts.prices cost.cost","license":"Apache-2.0（Humanoid/ 目录；LeRobot 驱动）· 未声明许可证（仓库根目录、Arm/ 目录、Project-Homunculus）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/TheRobotStudio/HOPEJr","botedu_url":"https://botedu.ai/en/builds/hopejr"},{"id":"amazinghand","name_en":"Amazing Hand (AH!)","name_zh":"Amazing Hand（AH!）","goal":"hands","level":"intermediate","kind":"open-hardware","cost_amount":116.89,"cost_currency":"EUR","cost_basis":"bom","cost_note":"The official BOM sheet totals €116.89 per hand (about $135.59, including €15 of 3D prints), €128.28 with a Waveshare driver board or €142.29 with an Arduino Mega and TTL Linker; Enhanced is €275.61, or €287.00 with the driver board. Ready kits (2026‑10‑31): Seeed Studio $99.00 per hand, WowRobo $99–179 (taxes included, shipping extra)","guide_steps":156,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":100,"ready_to_build":"yes","score_gaps":"","license":"Apache-2.0（代码）· CC BY 4.0（机械设计）","hardware_license":"CC BY 4.0","software_license":"Apache-2.0","project_url":"https://github.com/pollen-robotics/AmazingHand","botedu_url":"https://botedu.ai/en/builds/amazinghand"},{"id":"blossom","name_en":"Blossom (handcrafted open-source social robot)","name_zh":"Blossom 手工开源社交机器人","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":200,"cost_currency":"USD","cost_basis":"estimate","cost_note":"Not sold. The rebuild docs put the Dynamixel configuration under $200 in components and the micro-servo plus Arduino configuration at about $50 (GitHub blsm.md, 2026‑10‑31); the original BOM lists parts without prices","guide_steps":158,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":67,"ready_to_build":"no","score_gaps":"files.print files.cad guide.video licence.hardware","license":"MIT（hrc2/blossom-public 原版）· AGPL-3.0（msgtn/r0b0 重制版）· 未单独声明硬件许可证","hardware_license":"","software_license":"MIT","project_url":"https://github.com/hrc2/blossom-public","botedu_url":"https://botedu.ai/en/builds/blossom"},{"id":"xgo","name_en":"XGO-lite3 (education model of the XGO series)","name_zh":"XGO-lite3（XGO 系列教育版机器狗）","goal":"quadruped","level":"starter","kind":"software-open","cost_amount":599,"cost_currency":"USD","cost_basis":"product","cost_note":"List price $599.00, with a sale price of $479.20 shown on the page (LuwuDynamics official store shop.xgorobot.com, 2026‑10‑31, pre-sale, ships within 10 days; tax and shipping not stated); Taobao and JD CNY prices not read","guide_steps":57,"guide_stages":"assemble calibrate software source use","parts_price_regions":"","score":90,"ready_to_build":"no","score_gaps":"guide.video","license":"Apache-2.0（Luwu-OS，含 xgolib 与 xgoedu 源码；luwu_mjlab）· MIT（luwu-ros、xgo-blockly-luwuos）· 下位机固件不公开 · 硬件文件未声明许可证","hardware_license":"","software_license":"Apache-2.0","project_url":"https://github.com/LuwuDynamics/luwu_os","botedu_url":"https://botedu.ai/en/builds/xgo"},{"id":"bambot","name_en":"BamBot (bambot-b0)","name_zh":"BamBot（bambot-b0）","goal":"manipulation","level":"intermediate","kind":"open-hardware","cost_amount":300,"cost_currency":"USD","cost_basis":"bom","cost_note":"The creator's BOM totals about $300 / about €300 / about CN¥2,000 (15 12V STS3215 servos at about $15 each, a servo driver board, three 4-inch omni wheels, screws and cables); the creator's estimate, excluding 3D printing, a 20,000 mAh power bank, the computer and camera, and the teleoperation leader arms (another 12 servos and a driver board)","guide_steps":8,"guide_stages":"assemble print source use","parts_price_regions":"US EU CN","score":70,"ready_to_build":"no","score_gaps":"files.cad guide.steps guide.software guide.pictures guide.video","license":"Apache-2.0（仓库与 lerobot-bambot 分支）· MIT（feetech.js 的 package.json）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/timqian/bambot","botedu_url":"https://botedu.ai/en/builds/bambot"},{"id":"trlc-dk1","name_en":"TRLC-DK1 (The Robot Learning Company Developer Kit 1)","name_zh":"TRLC-DK1（The Robot Learning Company 开发套件 1）","goal":"manipulation","level":"intermediate","kind":"kit","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No official price found: the shop link robot-learning.co showed no product or price on 2026‑11‑01, and neither the repo nor the docs give a BOM cost; the docs price only the light box, at about €600 in off-the-shelf parts","guide_steps":121,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":64,"ready_to_build":"no","score_gaps":"cost.cost guide.pictures guide.video","license":"Apache-2.0（CAD、URDF 与代码；LICENSE 文首另有“All rights reserved”版权声明）· 部分代码源自 DM_Control_Python 与 GELLO（MIT）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/robot-learning-co/trlc-dk1","botedu_url":"https://botedu.ai/en/builds/trlc-dk1"},{"id":"alohamini","name_en":"AlohaMini (AlohaMini2 / AlohaMini 1)","name_zh":"AlohaMini（AlohaMini2 / AlohaMini 1）","goal":"mobile-manipulation","level":"intermediate","kind":"open-hardware","cost_amount":950,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The creators' estimates: the README lists the main parts at about $950 (leader arms excluded, frame self-printed from about 6 kg of filament); BOM.md totals the full set (base, two follower arms, two leader arms, fasteners) at CN¥7,548 / about $1,097 self-printed, excluding about 5 kg of filament and common tools such as a table clamp, soldering iron and screwdrivers. The first generation was about $600 self-printed","guide_steps":143,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"US","score":95,"ready_to_build":"yes","score_gaps":"guide.video","license":"Apache-2.0（AlohaMini 硬件与文档、AM-ARM 机械臂、lerobot_alohamini 软件）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/liyiteng/AlohaMini","botedu_url":"https://botedu.ai/en/builds/alohamini"},{"id":"lelamp","name_en":"LeLamp (open-source expressive robot lamp)","name_zh":"LeLamp 开源表情机器人台灯","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":310.64,"cost_currency":"USD","cost_basis":"bom","cost_note":"Not sold and no kit. The creators' BOM sheet totals $310.64 at US reference prices (read 2026‑11‑01; includes $30 of 3D prints, excludes tools, shipping and tax); the README separately says about $260. The creators note that the BOM's shopping links are for reference only","guide_steps":102,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":80,"ready_to_build":"yes","score_gaps":"files.cad guide.video parts.shops","license":"GPL-3.0（主仓库：打印文件、文档与仿真模型）· 未声明许可证（lelamp_runtime 仓库无许可证文件，README 指向主仓库）","hardware_license":"GPL-3.0","software_license":"GPL-3.0","project_url":"https://github.com/humancomputerlab/LeLamp","botedu_url":"https://botedu.ai/en/builds/lelamp"},{"id":"coglet","name_en":"Coglet (desktop companion robot)","name_zh":"Coglet 桌面陪伴机器人","goal":"companion","level":"advanced","kind":"kit","cost_amount":143.57,"cost_currency":"GBP","cost_basis":"kit","cost_note":"Coglet Complete Kit from £143.57, up to £392.83 with internal prints, skin and realistic eyes (NMRobotics official store, 2026‑11‑01; the page says taxes included, and the site banner gives £10 delivery to most countries); the base kit has the CogNog board, both cameras, 9 servos, 9 TorqueStars, 65 M2 screws, power board, mic board and speaker, without printed parts. The repo gives no self-sourced BOM total","guide_steps":133,"guide_stages":"assemble calibrate data software source use","parts_price_regions":"","score":89,"ready_to_build":"no","score_gaps":"guide.pictures","license":"CC BY-NC 4.0（硬件设计、3D 模型与原创代码，禁止商用）· MIT（CogletESP 中源自小智 AI 的部分文件）","hardware_license":"CC BY-NC 4.0","software_license":"CC BY-NC 4.0","project_url":"https://github.com/will-cogley/Coglet","botedu_url":"https://botedu.ai/en/builds/coglet"},{"id":"nanosaur","name_en":"nanosaur (open-source NVIDIA Jetson dinosaur robot)","name_zh":"nanosaur 开源 Jetson 恐龙机器人","goal":"mobile","level":"intermediate","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No kit is sold and the site gives no total. The BoM prices each part for the US, e.g. Pololu micro gearmotor $25.75, Adafruit motor driver $29.10, power bank $29.99, 5 GHz dongle $13.90, 64 GB microSD $9.99, Raspberry Pi Camera v2 $23.50, PLA $15 a spool, NinjaTek TPU $40; no Jetson price is listed. The first 5 expansion boards from PCBWay are free apart from shipping","guide_steps":62,"guide_stages":"assemble print source","parts_price_regions":"","score":55,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices cost.cost guide.software","license":"MIT（代码）· CC BY-NC-SA 4.0（结构设计、STL 与 PCB，禁止商用）· CC BY-NC-ND 4.0（官网内容）","hardware_license":"CC BY-NC-SA 4.0","software_license":"MIT","project_url":"https://github.com/rnanosaur/nanosaur","botedu_url":"https://botedu.ai/en/builds/nanosaur"},{"id":"mearm","name_en":"MeArm (pocket-sized robot arm)","name_zh":"MeArm 口袋机械臂","goal":"manipulation","level":"starter","kind":"kit","cost_amount":46.99,"cost_currency":"GBP","cost_basis":"kit","cost_note":"MeArm Maker Kit from £46.99 (no controller or power supply), MeArm WiFi kit £69.99, micro:bit kit £69.99 (MeArm's official store shop.mearm.com, 2026‑11‑01, shown in GBP with taxes included; shipping calculated at checkout, and a banner promises free worldwide shipping from the UK; the store converts by region, and the site's collector read SGD 83.00 the same day)","guide_steps":13,"guide_stages":"print software source","parts_price_regions":"","score":78,"ready_to_build":"no","score_gaps":"guide.pictures guide.video","license":"CC BY-SA 3.0（硬件，README）· Beerware（代码，README）· 图片 CC-SA-NC（禁止商用）· 主仓库无许可证文件","hardware_license":"CC BY-SA 3.0","software_license":"Beerware","project_url":"https://github.com/MeArm/MeArm","botedu_url":"https://botedu.ai/en/builds/mearm"},{"id":"q8bot","name_en":"Q8bot miniature quadruped","name_zh":"Q8bot 迷你四足机器人","goal":"quadruped","level":"intermediate","kind":"open-hardware","cost_amount":311.55,"cost_currency":"USD","cost_basis":"bom","cost_note":"Not sold as a robot or kit; the creator's BOM estimate (US sourcing, with estimated tax and shipping in brackets): $311.55 ($337.29) with your own 3D printer and reflow, $333.62 ($365.88) with MJF printing outsourced, and $404.13 ($435.68) with PCB assembly also outsourced (assembly estimated at $100); the 8 DYNAMIXEL XL330s alone are $219.92. Tools, a Li-ion charger and the optional U2D2 are excluded. The README calls the BOM unoptimised at about $300–400","guide_steps":84,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":72,"ready_to_build":"no","score_gaps":"files.print files.cad guide.video","license":"MIT","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/EricYufengWu/q8bot","botedu_url":"https://botedu.ai/en/builds/q8bot"},{"id":"open-duck-mini","name_en":"Open Duck Mini v2 (mini BDX biped)","name_zh":"Open Duck Mini v2（迷你 BDX 双足机器人）","goal":"biped","level":"intermediate","kind":"open-hardware","cost_amount":398.1,"cost_currency":"EUR","cost_basis":"bom","cost_note":"The creator's BOM sheet totals €398.10 (lowest estimate €331.10, €432.34 with the expression package) and the README says the full BOM should be under $400; a creator's estimate without a 3D printer, tools or shipping, with PLA counted at €20. The complete Tnkr kit is $600 (2026‑11‑01, shipping extra, duties and VAT paid by the buyer)","guide_steps":122,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":95,"ready_to_build":"yes","score_gaps":"parts.shops","license":"Apache-2.0（主仓库：STL、文档、策略）· 运行时与仿真仓库未声明许可证","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/apirrone/Open_Duck_Mini","botedu_url":"https://botedu.ai/en/builds/open-duck-mini"},{"id":"qmini","name_en":"Unitree Qmini (3D-printable open-source biped)","name_zh":"宇树 Qmini（可 3D 打印的开源双足机器人）","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Unitree sells no robot or kit and gives no total BOM cost. The official Unitree store lists the GO-M8010-6 motor at $369.00 each (the BOM needs 11 8010 motors) and the USB-to-4-channel 485 module at $30.00 (2026‑11‑01, store shown in USD, tax and shipping not read); the Go1 battery, Raspberry Pi and filament prices were not read","guide_steps":63,"guide_stages":"assemble calibrate print source","parts_price_regions":"","score":50,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices cost.cost guide.video parts.shops","license":"CC BY-NC-SA 4.0（Qmini 仓库：STEP、URDF、DIY 说明，仅限非商业）· MIT（RoboTamer4Qmini、RoboTamerSdk4Qmini）","hardware_license":"CC BY-NC-SA 4.0","software_license":"MIT","project_url":"https://github.com/unitreerobotics/Qmini","botedu_url":"https://botedu.ai/en/builds/qmini"},{"id":"upkie","name_en":"Upkie open-source wheeled biped","name_zh":"Upkie 开源轮式双足机器人","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":3000,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The creator's FOSDEM 2026 talk abstract says one can be built from off-the-shelf parts for around $3,000; a creator's estimate, the BOM page lists no prices, and whether a 3D printer, tools and shipping are counted is not stated. No official kit is sold","guide_steps":175,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":70,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices","license":"Apache-2.0（软件、文档、3D 打印件与 URDF）· CC BY 4.0（URDF 中的轮胎网格）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/upkie/upkie","botedu_url":"https://botedu.ai/en/builds/upkie"},{"id":"orca-hand","name_en":"ORCA Hand (orcahand v2)","name_zh":"ORCA 灵巧手（orcahand v2）","goal":"hands","level":"advanced","kind":"open-hardware","cost_amount":2500,"cost_currency":"USD","cost_basis":"kit","cost_note":"Official BOM kits (orcahand.com, 2026‑11‑01, USD, shipping and import taxes extra): the full Dynamixel kit is $2,500; by group, servos + driver board + harness cost $1,800 (Dynamixel) or $1,000 (Feetech), printed parts $250, silicone skin $200 and mechanical parts $250. The official BOM sheet lists unit prices only, e.g. $103.39 per XC330-T288-T (16 needed) and $137.89 for the XC430-T240BB-T; the v1 paper puts material cost under CHF 2,000. Assembled hands start at $3,500","guide_steps":15,"guide_stages":"assemble print","parts_price_regions":"","score":75,"ready_to_build":"no","score_gaps":"parts.prices guide.software guide.video parts.shops","license":"CC BY 4.0（硬件设计与仓库内代码）· MIT（orca_core、orcahand_description、orca_ui）· 触觉模块闭源","hardware_license":"CC BY 4.0","software_license":"MIT","project_url":"https://github.com/orcahand/orcahand_hardware","botedu_url":"https://botedu.ai/en/builds/orca-hand"},{"id":"openarm","name_en":"OpenArm 2.0 (open-source humanoid arms)","name_zh":"OpenArm 2.0（开源仿人双臂）","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":6500,"cost_currency":"USD","cost_basis":"estimate","cost_note":"Enactic puts a complete bimanual system at $6,500 (README and LeRobot docs; openarm.dev labels the figure bill-of-materials cost). The certified manufacturer WowRobo sells it assembled for $6,500 without the top stereo camera or $7,300 with it (2026‑11‑01, shipping and import duties extra); no DIY kit price is listed","guide_steps":113,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":50,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.pictures guide.video parts.list parts.shops","license":"CERN-OHL-S-2.0（硬件）· Apache-2.0（openarm_can、ROS 2、仿真与 dora-rs 节点等软件）","hardware_license":"CERN-OHL-S-2.0","software_license":"Apache-2.0","project_url":"https://github.com/enactic/openarm","botedu_url":"https://botedu.ai/en/builds/openarm"},{"id":"koch-v1-1","name_en":"Koch v1.1 low-cost robot arm (leader/follower pair)","name_zh":"Koch v1.1 低成本机械臂（主从臂一对）","goal":"manipulation","level":"starter","kind":"open-hardware","cost_amount":477,"cost_currency":"USD","cost_basis":"bom","cost_note":"The creator's BOM estimate in the README: leader $199 and follower $278 (US prices, about $477 for the pair); €305 + €368 in Europe, £222 + £285 in the UK, CN¥1,696 + CN¥2,251 in China, JP¥6,993 + JP¥15,446 in Japan. Filament, printer and shipping are excluded and the README notes regional variation; there is no official kit price","guide_steps":126,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"US CN JP","score":100,"ready_to_build":"yes","score_gaps":"","license":"Apache-2.0（仓库，LeRobot 许可证副本）· MIT（原版 low_cost_robot）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/jess-moss/koch-v1-1","botedu_url":"https://botedu.ai/en/builds/koch-v1-1"},{"id":"esp-hi","name_en":"ESP-Hi AI chat robot dog","name_zh":"ESP-Hi AI 对话机器狗","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":49.9,"cost_currency":"CNY","cost_basis":"estimate","cost_note":"The OSHWHub build-cost field reads CN¥49.9 (the creator's estimate, with no BOM breakdown and nothing said about the servo base, battery, 3D printing or shipping); Espressif does not sell it, and a third-party Tindie seller asks $49.00 (2026‑11‑01, shipping extra)","guide_steps":229,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":61,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.video","license":"GPL 3.0（立创开源硬件，页面另注仅供学习交流、禁止商业售卖）· Apache-2.0（Gitee 例程与 3D 文件）· MIT（xiaozhi-esp32 固件）","hardware_license":"GPL 3.0","software_license":"MIT","project_url":"https://github.com/78/xiaozhi-esp32","botedu_url":"https://botedu.ai/en/builds/esp-hi"},{"id":"eda-robot-dog","name_en":"EDA-Robot dog","name_zh":"EDA-Robot 机器狗","goal":"quadruped","level":"starter","kind":"open-hardware","cost_amount":30,"cost_currency":"CNY","cost_basis":"estimate","cost_note":"The creator's estimate is about CN¥30 without batteries (single-unit prices ignoring minimum order quantities); the page's recommended parts list totals CN¥61.49 at LCSC minimum quantities and CN¥30.47 per unit, both including a CN¥0.5 Taobao battery holder and four SG90 servos for CN¥14 (the listed unit prices add up to about CN¥43.9, which does not match the per-unit subtotal); 14500 cells, the charger module, PCB, shell printing and shipping are excluded","guide_steps":153,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":50,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.video parts.shops licence.software","license":"GPL 3.0（立创开源页，另注仅供学习交流、禁止商业售卖）· Gitee 源码仓库未声明许可证","hardware_license":"GPL 3.0","software_license":"","project_url":"https://oshwhub.com/course-examples/bot-dog","botedu_url":"https://botedu.ai/en/builds/eda-robot-dog"},{"id":"roboto-origin","name_en":"Roboto Origin (RPO)","name_zh":"萝博头原型机（ROBOTO ORIGIN / RPO）","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":49713,"cost_currency":"CNY","cost_basis":"bom","cost_note":"The creator's BOM (Internal Roboto D-BOM, ATOM 01 v1.0.1, 2026‑01‑05) totals CN¥49,713 in its header and CN¥49,743.53 at its foot (the two disagree), of which joint motors are CN¥31,187 and CNC parts CN¥15,670; 3D prints and most harnesses and screws carry no price, and shipping, tools and the optional camera and lidar are excluded. Official parts kits sell through a Taobao shop whose price was not read","guide_steps":183,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":90,"ready_to_build":"yes","score_gaps":"guide.video parts.shops","license":"GPL-3.0-only（roboto_origin 聚合层、roboparty_deploy 等软件）· CERN-OHL-W-2.0（rpo_hardware 结构/PCB/BOM、rpo_description、rpo_appearance）· CC-BY-SA-4.0（硬件文档）· BSD-3-Clause（roboparty_train，README 声明）","hardware_license":"CERN-OHL-W-2.0","software_license":"GPL-3.0-only","project_url":"https://github.com/Roboparty/roboto_origin","botedu_url":"https://botedu.ai/en/builds/roboto-origin"},{"id":"jpl-open-source-rover","name_en":"JPL Open Source Rover (OSR)","name_zh":"JPL 开源火星车（JPL Open Source Rover，OSR）","goal":"mobile","level":"advanced","kind":"open-hardware","cost_amount":1421.18,"cost_currency":"USD","cost_basis":"bom","cost_note":"The official parts list totals $1,421.18 (goBILDA structure and motors plus Digi‑Key electronics, before the 15% goBILDA education discount and excluding shipping, with a note that goBILDA may change prices; read 2026‑11‑01). It lists extra parts to source separately: PCB fabrication, laser-cut body plates, three RoboClaw motor controllers, regulators, battery and charger, a Raspberry Pi and SD card, wiring, connectors and a gamepad, adding about $500 if you have none of them; the README overview puts the total at about $1,600","guide_steps":298,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":90,"ready_to_build":"yes","score_gaps":"files.cad","license":"Apache-2.0（整个主仓库：零件清单、KiCad 控制板、车身板与文档；osr-rover-code 软件同为 Apache-2.0）· OSHWA 认证 US002551","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/nasa-jpl/open-source-rover","botedu_url":"https://botedu.ai/en/builds/jpl-open-source-rover"},{"id":"jetbot","name_en":"NVIDIA JetBot (Jetson Nano AI education robot)","name_zh":"NVIDIA JetBot（Jetson Nano AI 教育小车）","goal":"mobile","level":"intermediate","kind":"open-hardware","cost_amount":250,"cost_currency":"USD","cost_basis":"estimate","cost_note":"NVIDIA's docs put the parts under $250 including the Jetson Nano, or under $150 on top of a Nano; the BOM prices are undated and the Jetson Nano Developer Kit is discontinued. The Orin BOM lists the Jetson Orin Nano 8GB Developer Kit at $499. Waveshare's official store sells the JetBot AI Kit accessories pack for $105.99 (no Jetson Nano or 18650 batteries; 2026‑11‑01, tax and shipping not stated)","guide_steps":121,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":78,"ready_to_build":"no","score_gaps":"files.print files.cad","license":"MIT（整个仓库：jetbot 库、Notebook 与车体 STL/STEP 文件；未另行声明硬件许可证）","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/NVIDIA-AI-IOT/jetbot","botedu_url":"https://botedu.ai/en/builds/jetbot"},{"id":"andino","name_en":"Andino (Ekumen's open-source ROS 2 education robot)","name_zh":"Andino（Ekumen 开源 ROS 2 教育小车）","goal":"mobile","level":"intermediate","kind":"open-hardware","cost_amount":300,"cost_currency":"USD","cost_basis":"estimate","cost_note":"Ekumen's 2023‑07 announcement puts the build under $300 (the creator's estimate, for the design before the redesign, without saying what it covers); the redesigned README BOM gives purchase links but no prices. No official kit is sold","guide_steps":206,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":75,"ready_to_build":"no","score_gaps":"files.cad parts.prices guide.video","license":"BSD-3-Clause（各 ROS 2 包分别附许可证，含 andino_hardware 的 BOM 与 STL；仓库根目录无许可证文件）","hardware_license":"BSD-3-Clause","software_license":"BSD-3-Clause","project_url":"https://github.com/Ekumen-OS/andino","botedu_url":"https://botedu.ai/en/builds/andino"},{"id":"t-top","name_en":"T-Top (tabletop socially assistive robot)","name_zh":"T-Top 桌面社交辅助机器人","goal":"companion","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Not sold and no kit. The BOM (00_ORDER_PRINT_LASER_CUTTING.md) lists quantities and shop links only, with no unit prices or total; its big-ticket parts include an NVIDIA Jetson AGX Xavier or AGX Orin developer kit, an Intel RealSense D435i and 7 Dynamixel XL430‑W250‑T servos","guide_steps":100,"guide_stages":"calibrate data print software source use","parts_price_regions":"","score":72,"ready_to_build":"no","score_gaps":"parts.prices cost.cost guide.video","license":"GPL-3.0（源代码文件）· CC BY-NC-SA 4.0（其余文件：CAD、PCB、文档等，禁止商用）","hardware_license":"CC BY-NC-SA 4.0","software_license":"GPL-3.0","project_url":"https://github.com/introlab/t-top","botedu_url":"https://botedu.ai/en/builds/t-top"},{"id":"akari","name_en":"AKARI (small desktop AI camera robot)","name_zh":"AKARI 小型桌面 AI 摄像头机器人","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No sales and no official kit were found. The manual's parts lists give shop links and quantities but no prices or total; it says only that AKARI Light costs about half as much up front as AKARI","guide_steps":54,"guide_stages":"assemble calibrate source","parts_price_regions":"","score":67,"ready_to_build":"no","score_gaps":"parts.prices cost.cost guide.video parts.shops","license":"CC BY 4.0（硬件：akari_hardware）· Apache-2.0（基础软件、M5Stack 软件与官方应用）","hardware_license":"CC BY 4.0","software_license":"Apache-2.0","project_url":"https://github.com/AkariGroup/akari_hardware","botedu_url":"https://botedu.ai/en/builds/akari"},{"id":"peeqo","name_en":"Peeqo (GIF-speaking desktop companion robot)","name_zh":"Peeqo GIF 桌面陪伴机器人","goal":"companion","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"The dev kit is sold out (peeqo.com, 2026‑11‑01, waitlist only) and has no current price; neither the repos nor the wiki give a parts list or total","guide_steps":111,"guide_stages":"assemble calibrate software source use","parts_price_regions":"","score":39,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices cost.cost guide.pictures guide.video parts.shops","license":"GPL-3.0（2017 版硬件与软件）· 未声明许可证（shekit/peeqo：2019 版与新一代软件）","hardware_license":"GPL-3.0","software_license":"GPL-3.0","project_url":"https://github.com/shekit/peeqo","botedu_url":"https://botedu.ai/en/builds/peeqo"},{"id":"tiny-engineer","name_en":"Tiny Engineer (a desk robot that gives an AI coding agent a body)","name_zh":"Tiny Engineer（给 AI 编程助手一个身体的桌面机器人）","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"There is no kit or assembled price, and the creator gives no total parts cost. The main board is ordered from a PCB fab using the KiCad files: in discussion #50 the creator says JLCPCB has a five-board minimum, at about $75 with single-sided assembly or about $150 fully assembled on both sides (the creator's estimates, shipping extra); an assembled board at about $15–20 is only an interest check. The rest is an ESP32‑C3‑Zero, five servos, an OLED, a speaker, M2 screws, a 5 V ≥2 A supply and the printed parts, for which the docs give shop links but no prices","guide_steps":239,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":72,"ready_to_build":"no","score_gaps":"parts.prices cost.cost guide.video","license":"MIT（固件、CLI、集成与文档）· CERN-OHL-S-2.0（Fusion CAD、打印件与 KiCad 主控板）· 名称与标志保留","hardware_license":"CERN-OHL-S-2.0","software_license":"MIT","project_url":"https://github.com/jamro/tiny-engineer","botedu_url":"https://botedu.ai/en/builds/tiny-engineer"},{"id":"makerspet-mini","name_en":"Maker's Pet Mini (LiDAR ROS 2 education robot)","name_zh":"Maker's Pet Mini 激光雷达 ROS 2 教育小车","goal":"mobile","level":"intermediate","kind":"kit","cost_amount":77,"cost_currency":"USD","cost_basis":"kit","cost_note":"120mm Build Pack $77–150 (Maker's Pet official store, 2026‑11‑01, USD): $150 with printed parts and the LD14P LiDAR, down to $77 if you print the parts and bring your own LiDAR; batteries not included, sales tax only on orders shipped to California, free worldwide shipping over $150 per the home page, and import taxes on international orders paid by the buyer. Parts sold separately: BDC‑30P driver board $35, LD14P LiDAR $59, 120mm body from $20, N20 encoder motor $10, ESP32E dev board $9","guide_steps":206,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":100,"ready_to_build":"no","score_gaps":"","license":"Apache-2.0（固件、ROS 2 软件、车体 3MF/STEP 与 Fusion 360 源文件）· BDC-30P 驱动板只公开原理图 PDF 与 STEP 外形模型","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/makerspet/ebook","botedu_url":"https://botedu.ai/en/builds/makerspet-mini"},{"id":"raspberry-pi-mouse","name_en":"Raspberry Pi Mouse V3 (Raspberry Pi teaching mobile robot)","name_zh":"Raspberry Pi Mouse V3 树莓派教学移动机器人","goal":"mobile","level":"intermediate","kind":"kit","cost_amount":71500,"cost_currency":"JPY","cost_basis":"kit","cost_note":"Full kit JP¥71,500 (with a Raspberry Pi 4B, a preinstalled microSD, battery, charger and AC adapter); without a Pi JP¥49,500 (robot and battery only); as shown on RT's product page on 2026‑11‑01, both including tax, with shipping not stated. The page's shop links are dead, and RT's relaunched web store ai.rt-shop.jp does not list it","guide_steps":10,"guide_stages":"source use","parts_price_regions":"","score":82,"ready_to_build":"no","score_gaps":"guide.assembly guide.software","license":"Apache-2.0（硬件仓库的 3D CAD 与 PDF 原理图；ROS 2 软件包）· GPL-2.0-only（设备驱动，SampleProgram 目录为 Apache-2.0）· MIT（raspimouse_sim、raspimouse_description）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/rt-net/RaspberryPiMouse_Hardware","botedu_url":"https://botedu.ai/en/builds/raspberry-pi-mouse"},{"id":"bumperbot","name_en":"Bumperbot (the self-built ROS 2 robot from Antonio Brandi's courses)","name_zh":"Bumperbot（Antonio Brandi 课程中的 ROS 2 自制小车）","goal":"mobile","level":"intermediate","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Neither the repo nor the course pages give a BOM total. The build is taught in the Udemy courses: Udemy showed S$19.98 for each of the three courses to our request (Singapore dollars, 2026‑11‑01; list price also S$19.98, with the KEEPLEARNING deal code; Udemy prices vary by region and promotion, and the page does not say whether tax is included). The learnbydoing.dev kits page lists kits at €199.99 / €279.99 / €379.99, but they cannot be ordered yet","guide_steps":23,"guide_stages":"assemble software source use","parts_price_regions":"","score":60,"ready_to_build":"no","score_gaps":"files.cad parts.prices cost.cost guide.video parts.shops","license":"Apache-2.0（仓库级，含 ROS 2 包、Arduino 固件、SolidWorks CAD 与 STL；无单独硬件许可证）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/AntoBrandi/Bumper-Bot","botedu_url":"https://botedu.ai/en/builds/bumperbot"},{"id":"pogobot","name_en":"Pogobot (swarm robot)","name_zh":"Pogobot 群体机器人","goal":"mobile","level":"advanced","kind":"open-hardware","cost_amount":250,"cost_currency":"EUR","cost_basis":"estimate","cost_note":"Not sold and no kit. The creators' paper (arXiv 2504.08686 v2, 2025‑11) estimates about €250 per assembled robot, not itemised and without saying whether tax is included; the head board has to be made by an electronics manufacturing service","guide_steps":209,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":83,"ready_to_build":"yes","score_gaps":"parts.prices guide.video","license":"MIT（主仓库：KiCad 电路板、3D 打印件、FPGA 门级设计与固件；GitHub 识别为 NOASSERTION）· MIT（SDK）· 未声明许可证（Pogosim 模拟器、pogo-utils、pogotrack）","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/nekonaute/pogobot","botedu_url":"https://botedu.ai/en/builds/pogobot"},{"id":"pingti-arm","name_en":"PingTi Arm (low-cost human-arm-scale robot arm)","name_zh":"PingTi Arm 人臂尺度低成本机械臂","goal":"manipulation","level":"intermediate","kind":"open-hardware","cost_amount":261,"cost_currency":"USD","cost_basis":"bom","cost_note":"The creator's BOM estimate in the README: about $261 for one arm (the English table totals $261.09 / €218.28) and about $390 for a pair with an SO‑100 leader; the Chinese table totals CN¥1,719.1 for one arm (the Chinese README says about CN¥1,800, or CN¥2,486 for a pair). Upgrading an SO‑100 follower that already uses 12V 30 kg·cm servos costs about $157 (CN¥973). The English table leaves out a power supply and USB cable (the Chinese one includes a 12V 5A supply), and neither includes filament, screws or shipping; the creator says prices are for reference only. There is no official kit price","guide_steps":66,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"US","score":90,"ready_to_build":"yes","score_gaps":"files.cad","license":"Apache-2.0（仓库：STL、Fusion 360 模型、URDF 与文档）· Apache-2.0（pingti_lerobot_bridge）","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/nomorewzx/PingTi-Arm","botedu_url":"https://botedu.ai/en/builds/pingti-arm"},{"id":"k2-biped","name_en":"K2 (open-source 3D-printed 12-DoF biped)","name_zh":"K2 开源 3D 打印 12 自由度双足机器人","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":320.52,"cost_currency":"USD","cost_basis":"bom","cost_note":"The creator's README BOM totals $320.52 (the builder's own prices, excluding shipping, tax and printer time; the optional Raspberry Pi 5 is not included). The project site separately gives a $224–225 parts subtotal (before controller, printed parts and shipping) and calls it the builder's estimate, not a complete retail BOM. There is no official kit price","guide_steps":147,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":75,"ready_to_build":"no","score_gaps":"files.cad guide.pictures guide.video parts.shops","license":"MIT（整个仓库：固件、树莓派运行时、训练代码、策略与 STL；无可编辑 CAD）","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/kapalikkhanal/K2","botedu_url":"https://botedu.ai/en/builds/k2-biped"},{"id":"miniloong","name_en":"MiniLoong (Qinglong Mini, RL-Boy) small humanoid for reinforcement learning","name_zh":"青龙 Mini 强化学习小型人形机器人（MiniLoong · RL-Boy 强化小子）","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Not sold and no kit. The README BOM's unit-price column, in CNY: 6006 motor CN¥799 (attribute column 4), 8006 motor CN¥1009 (attribute column 6), 3507 motor CN¥300 (attribute column 8, quote from Damiao), main board CN¥899, optional Jetson Nano CN¥1119, high-performance IMU CN¥900, ESP32 OmniTele remote CN¥600; carbon-fibre cutting, aluminium machining and 3D printing say “inquiry”, and there is no total. The links go to Taobao and Tmall (not read, 2026‑11‑01)","guide_steps":28,"guide_stages":"assemble calibrate software source","parts_price_regions":"","score":50,"ready_to_build":"no","score_gaps":"files.print parts.prices cost.cost guide.video parts.list parts.shops licence.hardware","license":"Apache-2.0（AtomGit openloong/MiniLoong 与 GitHub 镜像，仓库级）· 未声明许可证（原仓库 golaced/RL_Boy 与百度网盘三维模型）","hardware_license":"","software_license":"Apache-2.0","project_url":"https://github.com/loongOpen/MiniLoong","botedu_url":"https://botedu.ai/en/builds/miniloong"},{"id":"jbr-001","name_en":"JBR-001 (open-source desktop companion robot)","name_zh":"JBR-001 开源桌面陪伴机器人","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Not sold and no official kit; no BOM total is given. The Arduino Project Hub parts list names one each of the UNO Q 2GB, Modulino Distance, Modulino Motors, Modulino Buzzer and the USB‑C hub, and leaves out the camera, servos, external supply, cables and screws, with no prices","guide_steps":77,"guide_stages":"assemble calibrate data software source use","parts_price_regions":"","score":56,"ready_to_build":"no","score_gaps":"files.cad parts.prices cost.cost guide.video parts.shops","license":"CC0-1.0（仓库：STL、装配说明、接线图与源码）","hardware_license":"CC0-1.0","software_license":"CC0-1.0","project_url":"https://github.com/syntheticAIdata/JBR-001","botedu_url":"https://botedu.ai/en/builds/jbr-001"},{"id":"leap-ros2","name_en":"LEAP ROS2 (low-cost open ROS 2 learning car: LEAP_ROS / LEAP_ROS_MAX)","name_zh":"LEAP ROS2 低成本 ROS 2 开源学习小车（LEAP_ROS / LEAP_ROS_MAX）","goal":"mobile","level":"intermediate","kind":"open-hardware","cost_amount":200,"cost_currency":"CNY","cost_basis":"estimate","cost_note":"The creator's reference build cost in the README: about CN¥200 for LEAP_ROS and about CN¥600 for LEAP_ROS_MAX, varying with part choice, sourcing and quantity; it does not say whether a host computer or main board is included. The Taobao shop sells assembled PCBs, loose parts and finished robots (not read; prices unverified)","guide_steps":5,"guide_stages":"software source","parts_price_regions":"","score":39,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.steps guide.assembly guide.pictures guide.video parts.shops","license":"Apache-2.0 LICENSE 加 README 声明的“未经允许禁止商用”（leap_ros2：原理图、BOM、嘉立创 EDA 工程与 3D 打印外壳）· GPL-2.0（ROS 2 工作空间 leap_ros_ws）· 未声明许可证（下位机固件、图传固件与语音助手）","hardware_license":"Apache-2.0","software_license":"GPL-2.0","project_url":"https://github.com/czu963889306-dev/leap_ros2","botedu_url":"https://botedu.ai/en/builds/leap-ros2"},{"id":"lerobot-humanoid","name_en":"LeRobot Humanoid biped platform (Hugging Face's open low-cost humanoid)","name_zh":"LeRobot Humanoid 双足平台（Hugging Face 开源低成本人形机器人）","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":2635.84,"cost_currency":"USD","cost_basis":"estimate","cost_note":"No assembled robot or kit is sold. The hardware README's cost estimate (biped platform, 2026-04-30, US dollars, indicative and vendor-dependent): $2,579.84 of bought parts plus about 3.5 kg of PLA+ filament at $56.00, about $2,635.84 in all; shipping, import duties and local taxes are excluded, EUR prices are converted at 1 EUR = 1.1691 USD (2026-05-05) and fasteners use bulk-piece prices. The 12 motors dominate: RobStride O3 at $225 each ($900), O5 at $110 ($440), O2 at $145 ($290) and O0 at $125 ($250); the Raspberry Pi 5 is $130, the IMU $64, the CAN-FD adapter $59 and the 8 ball-joint rod ends $167.44. The release post puts it at around $2,500 in parts, depending on sourcing, shipping and taxes. The 3D printer and tools are not included (only a 2.5 mm hex key is listed)","guide_steps":114,"guide_stages":"assemble calibrate data print software source","parts_price_regions":"","score":61,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices parts.shops","license":"Apache-2.0（硬件仓库：STL、物料表与文档，版权 2026 The Hugging Face team；运行时、模型、设计与辨识仓库同为 Apache-2.0）· 训练环境 lerobot-legged-zoo 未声明许可证 · Onshape 源 CAD 未单独声明许可证","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/huggingface/lerobot-humanoid","botedu_url":"https://botedu.ai/en/builds/lerobot-humanoid"},{"id":"nanoloong","name_en":"NanoLoong (small teaching biped, from OpenTinker V2)","name_zh":"NanoLoong 小尺寸双足教具机器人（源自 OpenTinker V2）","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":15000,"cost_currency":"CNY","cost_basis":"estimate","cost_note":"Not sold and no kit. The README puts the whole robot under CN¥15,000 (the creator's estimate, without saying what it covers); the itemised BOM is a Feishu document that redirects to a login page and was not read","guide_steps":8,"guide_stages":"assemble print software source","parts_price_regions":"","score":50,"ready_to_build":"no","score_gaps":"files.print parts.prices guide.steps guide.pictures guide.video parts.list parts.shops licence.hardware","license":"Apache-2.0（AtomGit openloong/NanoLoong-Bipedal 与 GitHub 镜像，仓库级；原作者仓库 golaced/OmniBotSeries-Tinker 同为 Apache-2.0）· 未声明许可证（飞书 BOM 与教程）","hardware_license":"","software_license":"Apache-2.0","project_url":"https://github.com/loongOpen/NanoLoong-Bipedal","botedu_url":"https://botedu.ai/en/builds/nanoloong"},{"id":"parol6","name_en":"PAROL6 3D-printed desktop 6-axis robot arm","name_zh":"PAROL6 3D 打印桌面六轴机械臂","goal":"manipulation","level":"intermediate","kind":"kit","cost_amount":1999,"cost_currency":"EUR","cost_basis":"kit","cost_note":"Official store (2026‑11‑04, the collector's Singapore market, euros without VAT): partial kit €999 (in stock; add gearboxes, steppers, a supply and the printed parts), full kit €1,999 (out of stock; without printed parts and supply), assembled €3,000 (out of stock); printed-parts kit €400, screw kit €49, control board €199 / €396. The German market shows €3,570 with VAT for the assembled arm; shipping is calculated at checkout and buyers outside Europe pay duties and import taxes. The repo BOM gives purchase links only, with no prices or total","guide_steps":125,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":89,"ready_to_build":"no","score_gaps":"guide.video","license":"GPL-3.0（机器人仓库：STL、物料表、装配说明、控制板固件）· GPL-3.0（Python API、Commander 软件）· MIT（ROS 2 MoveIt 配置）· CC BY 4.0（URDF/MuJoCo 模型）· CC BY-SA 4.0（手册）· 控制板原理图与 PCB、STEP 文件不开源","hardware_license":"GPL-3.0","software_license":"GPL-3.0","project_url":"https://github.com/Source-Robotics/PAROL6-Desktop-robot-arm","botedu_url":"https://botedu.ai/en/builds/parol6"},{"id":"playbot","name_en":"PlayBot (open dock that turns a Playdate handheld into a desktop robot)","name_zh":"PlayBot：把 Playdate 掌机变成桌面机器人的开源底座","goal":"companion","level":"advanced","kind":"open-hardware","cost_amount":100,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The creator's estimate in the hardware README: about $100–120 per bot, shipping excluded; the Playdate itself is not included (Panic's official store listed it at $229.00 on 2026‑11‑04, out of stock that day). The custom boards cost about $10 each but are ordered in batches of 5; the optional HuskyLens is not in the estimate. There is no official kit price","guide_steps":86,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":78,"ready_to_build":"no","score_gaps":"files.cad parts.prices","license":"MIT（PlayBot：STL、Gerber、物料表与 Teensy 固件；pd-playbot-app 与 Playbot_Rig 同为 MIT，版权 2024 Guillaume Loquin）","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/GuybrushTreep/PlayBot","botedu_url":"https://botedu.ai/en/builds/playbot"},{"id":"robart","name_en":"RoBart LLM-controlled iPhone and hoverboard robot","name_zh":"RoBart 大模型控制的 iPhone 平衡车机器人","goal":"mobile","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"The creator gives no build cost or BOM total; the README only says the aim was a cheap mobile base from a hoverboard and an iPhone Pro. An iPhone Pro is needed too, plus LLM and Deepgram API usage","guide_steps":20,"guide_stages":"assemble calibrate data print software use","parts_price_regions":"","score":61,"ready_to_build":"no","score_gaps":"files.cad parts.prices cost.cost guide.pictures","license":"GPL-3.0（整个仓库：iOS 与 watchOS App、Arduino 固件、调试服务器、STL/3MF 打印件）","hardware_license":"GPL-3.0","software_license":"GPL-3.0","project_url":"https://github.com/trzy/RoBart","botedu_url":"https://botedu.ai/en/builds/robart"},{"id":"tars-ai","name_en":"TARS-AI (AI recreation of TARS from Interstellar)","name_zh":"TARS-AI 星际穿越 TARS 复刻 AI 机器人","goal":"companion","level":"intermediate","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Not sold and no official kit (the licence forbids selling prints, kits or complete robots). The wiki's BOM gives Amazon US links and quantities but no prices or total; it says only that V3 costs less overall than V2","guide_steps":0,"guide_stages":"","parts_price_regions":"","score":33,"ready_to_build":"no","score_gaps":"guide.steps parts.prices cost.cost guide.assembly guide.software guide.pictures guide.video parts.list parts.shops","license":"CC BY-NC 4.0（3D 模型与软件，禁止商用；AtomikSpace 部分另可取得商业授权）· MIT（源自 AME 的模块引擎与记忆功能）","hardware_license":"CC BY-NC 4.0","software_license":"CC BY-NC 4.0","project_url":"https://github.com/TARS-AI-Community/TARS-AI","botedu_url":"https://botedu.ai/en/builds/tars-ai"},{"id":"thor-arm","name_en":"Thor open-source 3D-printed 6-DoF robot arm","name_zh":"Thor 开源 3D 打印六自由度机械臂","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":350,"cost_currency":"EUR","cost_basis":"estimate","cost_note":"The creator's estimate: the FAQ puts the parts at about €350 and the README says hardware costs below €350, neither counting a 3D printer; the BOM gives purchase links only, with no prices. There is no official kit price","guide_steps":81,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":83,"ready_to_build":"yes","score_gaps":"parts.prices guide.video","license":"CC BY-SA 4.0（Thor 仓库、Thor-ROS、Asgard）· GPLv3（GRBL 分叉，COPYING）· Apache-2.0（Fly Super8Pro 配置）· ControlPCB 仓库未声明许可证","hardware_license":"CC BY-SA 4.0","software_license":"GPLv3","project_url":"https://github.com/AngelLM/Thor","botedu_url":"https://botedu.ai/en/builds/thor-arm"},{"id":"viam-rover","name_en":"Viam Rover (open-design learning rover: Viam Rover 2 / Rover 1)","name_zh":"Viam Rover 开源设计教学漫游车（Viam Rover 2 / Rover 1）","goal":"mobile","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No longer sold and no price on the official pages; the BOM lists parts and replacement links but no prices or total. A self-build also needs outsourced laser-cut plates, custom standoffs and springs and two circuit boards, plus a Raspberry Pi 4 (or another supported board), four 18650 cells or an RC battery with a charger, and a microSD card","guide_steps":70,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":72,"ready_to_build":"no","score_gaps":"parts.prices cost.cost guide.video","license":"Apache-2.0（Viam-Rover-2 与 Rover-VR1：CAD、物料表与电路板数据，版权 2022–2023 Viam Inc.）· AGPL-3.0（viam-server / RDK）· Apache-2.0（Python 与 TypeScript SDK）","hardware_license":"Apache-2.0","software_license":"AGPL-3.0","project_url":"https://github.com/viamrobotics/Viam-Rover-2","botedu_url":"https://botedu.ai/en/builds/viam-rover"},{"id":"alpha-mini","name_en":"UBTECH Alpha Mini (Wukong)","name_zh":"优必选 悟空机器人（Alpha Mini）","goal":"biped","level":"intermediate","kind":"software-open","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"UBTECH's site shows no price and no official store page selling it was found; the Python SDK and demos are free (PyPI, GitHub)","guide_steps":160,"guide_stages":"assemble calibrate data software source use","parts_price_regions":"","score":63,"ready_to_build":"no","score_gaps":"cost.cost guide.video","license":"MIT（alphamini Python SDK 源码包 LICENSE；setup.py 写 GPLv3）· MIT（mini_demo 示例）· 固件与 App 未开源","hardware_license":"","software_license":"MIT","project_url":"https://github.com/marklogg/mini_demo","botedu_url":"https://botedu.ai/en/builds/alpha-mini"},{"id":"robomaster-ep","name_en":"DJI RoboMaster EP Core (RoboMaster S1 Education Expansion Set Core)","name_zh":"大疆 RoboMaster EP Core（RoboMaster S1 教育拓展套装 Core）","goal":"mobile","level":"intermediate","kind":"software-open","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Neither DJI's site nor its store shows a price (the store product page says it does not exist, 2026‑10‑31); the SDK and developer guide are free","guide_steps":97,"guide_stages":"calibrate data software use","parts_price_regions":"","score":63,"ready_to_build":"no","score_gaps":"cost.cost guide.video","license":"Apache-2.0（RoboMaster SDK）· 固件、App 与硬件未开源","hardware_license":"","software_license":"Apache-2.0","project_url":"https://github.com/dji-sdk/RoboMaster-SDK","botedu_url":"https://botedu.ai/en/builds/robomaster-ep"},{"id":"mbot2","name_en":"Makeblock mBot2 (formerly mBot Neo)","name_zh":"童心制物 mBot2（原名 mBot Neo）","goal":"mobile","level":"starter","kind":"kit","cost_amount":149.99,"cost_currency":"USD","cost_basis":"product","cost_note":"Single robot $149.99, 3 robots $449.99, 6-robot classroom kit $1,199.99 (Makeblock US store, 2026‑10‑31; the page offers free shipping to the contiguous US and says nothing about tax). CyberPi's hardware is open but no BOM cost is given","guide_steps":7,"guide_stages":"software","parts_price_regions":"","score":56,"ready_to_build":"no","score_gaps":"guide.steps guide.assembly guide.pictures guide.video","license":"CERN-OHL-P v2（童芯派硬件）· GPL-3.0（童芯派软件与 Arduino SDK）· CC BY-SA 4.0（童芯派文档）· 扩展板、电机、传感器与 CyberOS 固件未开源","hardware_license":"CERN-OHL-P v2","software_license":"GPL-3.0","project_url":"https://github.com/Makeblock-official/CyberPi-Library-for-Arduino","botedu_url":"https://botedu.ai/en/builds/mbot2"},{"id":"cyberdog2","name_en":"Xiaomi CyberDog 2 bionic quadruped robot","name_zh":"小米 CyberDog 2 仿生四足机器人（铁蛋 2）","goal":"quadruped","level":"advanced","kind":"software-open","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"The Xiaomi store page shows no price (2026‑10‑31; the page data carries a price of 0 and the item is not enabled); no official BOM or BOM cost","guide_steps":157,"guide_stages":"calibrate data software source use","parts_price_regions":"","score":63,"ready_to_build":"no","score_gaps":"cost.cost guide.video","license":"Apache-2.0（cyberdog_ws 软件栈、cyberdog_locomotion、仿真与外壳 STEP 模型）· utils、cyberdog_vision 等未声明许可证 · 电路原理图与 PCB 未公开","hardware_license":"","software_license":"Apache-2.0","project_url":"https://github.com/MiRoboticsLab/cyberdog_ws","botedu_url":"https://botedu.ai/en/builds/cyberdog2"},{"id":"openloong","name_en":"QingLoong, OpenLoong's full-size open-source reference humanoid","name_zh":"青龙全尺寸通用人形机器人公版机（OpenLoong 青龙 · QingLoong）","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"Not sold; the official pages give no price and no BOM estimate (2026‑11‑03)","guide_steps":16,"guide_stages":"assemble calibrate software source","parts_price_regions":"","score":55,"ready_to_build":"no","score_gaps":"files.print parts.prices cost.cost guide.pictures guide.video parts.shops","license":"SHL-2.1（Apache-2.0 WITH SHL-2.1，OpenLoong-Hardware 图纸与文档）· Apache-2.0（OpenLoong-Dyn-Control、OpenLoong-Framework、OpenLoong-Gymloong 等软件）","hardware_license":"SHL-2.1","software_license":"Apache-2.0","project_url":"https://github.com/loongOpen/OpenLoong-Hardware","botedu_url":"https://botedu.ai/en/builds/openloong"},{"id":"agibot-x1","name_en":"AgiBot X1 full-stack open-source humanoid","name_zh":"智元灵犀 X1 全栈开源人形机器人（AgiBot X1）","goal":"biped","level":"advanced","kind":"software-open","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"No price on the official pages; the buy links for the whole-robot and parts packages point to agibotmall.com, which did not resolve on 2026‑11‑03. The open BOM lists parts and quantities but no prices","guide_steps":13,"guide_stages":"calibrate software source use","parts_price_regions":"","score":60,"ready_to_build":"no","score_gaps":"cost.cost guide.pictures guide.video","license":"未声明许可证（agibot_x1_hardware：BOM、STEP、SolidWorks 图纸与装机 SOP）· MulanPSL-2.0（agibot_x1_infer 与 AimRT）· BSD-3-Clause（agibot_x1_train，setup.py 与 SPDX 头声明，仓库无 LICENSE 文件）","hardware_license":"","software_license":"MulanPSL-2.0","project_url":"https://github.com/AgibotTech/agibot_x1_hardware","botedu_url":"https://botedu.ai/en/builds/agibot-x1"},{"id":"asimov-1","name_en":"Asimov 1 open-source humanoid (Menlo Research)","name_zh":"Asimov 1 开源人形机器人（Menlo Research）","goal":"biped","level":"advanced","kind":"open-hardware","cost_amount":20000,"cost_currency":"USD","cost_basis":"kit","cost_note":"Official DIY kit $20,000 (menlo.ai order page, 2026‑11‑03; the page writes only “$” with no currency code), reserved with a $499 deposit; the page says the final price varies by destination with tariffs and shipping, the FAQ says shipping and import duties are covered for many destinations, and the sale agreement says the price excludes taxes and tariffs. The self-sourcing BOM is sent on request by email and was not read; no official page gives a total","guide_steps":76,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":80,"ready_to_build":"yes","score_gaps":"parts.prices guide.video parts.shops","license":"CERN-OHL-S-2.0（asimov-1 硬件：机械 CAD、电气原理图与 PCB、线束）· GPL-2.0（asimov-1 仓库内软件）· Apache-2.0（menlo-sdk、v0 的 asimov-mjlab）· BSD-3-Clause（asimov-1-amp）· GPL-3.0（OpenCrane 吊架）","hardware_license":"CERN-OHL-S-2.0","software_license":"GPL-2.0","project_url":"https://github.com/menloresearch/asimov-1","botedu_url":"https://botedu.ai/en/builds/asimov-1"},{"id":"aharobot","name_en":"AhaRobot low-cost open-source bimanual mobile manipulator (Astra hardware)","name_zh":"AhaRobot 低成本开源双臂移动操作机器人（Astra 硬件）","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":1000,"cost_currency":"USD","cost_basis":"estimate","cost_note":"Creator's estimate: the website puts hardware at $1,000–2,000 ($1,000 without compute, $2,000 with an RTX 4060 Mini‑ITX computer), and its price table gives a hardware subtotal of $826.1 and $1,950.8 with compute. The docs' parts list totals $990 (CN¥7,132.57) for the base, lift frame and power plus the arms and head pan-tilt, $1,124 (CN¥8,098) for compute and its power supply, and $33 (CN¥239) for RoboPilot teleoperation; most parts come from Taobao and the aluminium profiles are ordered by MISUMI part number from JLC FA, and the list gives no shipping. The purchase form lists only add-ons (+$100 for assembly, +$1,500 for computer and battery) and no base price","guide_steps":80,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":75,"ready_to_build":"no","score_gaps":"parts.prices guide.video parts.list parts.shops","license":"GPL-3.0 加禁止商用的附加限制（Astra_Hardwares、astra_ws、AstraFirmwares 的 README 声明；LICENSE 文件为 GPL-3.0 原文）· MIT（astra_teleop）","hardware_license":"GPL-3.0","software_license":"GPL-3.0","project_url":"https://github.com/hilookas/Astra_Hardwares","botedu_url":"https://botedu.ai/en/builds/aharobot"},{"id":"roomi","name_en":"Roomi open-source cleaning and housekeeping robot","name_zh":"Roomi 开源保洁家务机器人","goal":"mobile-manipulation","level":"advanced","kind":"open-hardware","cost_amount":727,"cost_currency":"CAD","cost_basis":"bom","cost_note":"Not sold and no kit. The creators' estimate: the BOM sheet (2025‑07‑01) totals CA$727 for the steppers, drivers, RP2040 boards, encoders, power supply, two rolls of PLA, aluminium tube, bearings and the storage cart, mostly linked to Amazon; the README's cost table gives US $700, EU $600 and CN $960, all excluding shipping, tools and taxes. The BOM leaves out the on-board Raspberry Pi, the USB-to-TTL adapter for the gripper servo and the modified SO100 used as the leader arm","guide_steps":10,"guide_stages":"assemble data print software source","parts_price_regions":"","score":60,"ready_to_build":"no","score_gaps":"files.print files.cad guide.pictures guide.video parts.list parts.shops","license":"Apache-2.0（仓库级：STEP、STL、MJCF、RP2040 固件与 Python 代码；LICENSE 文首另有“Copyright 2025 Roomi. All rights reserved.”）· 物料表 Google 表格未声明许可证","hardware_license":"Apache-2.0","software_license":"Apache-2.0","project_url":"https://github.com/jadechoghari/roomi","botedu_url":"https://botedu.ai/en/builds/roomi"},{"id":"barkour","name_en":"Barkour agile quadruped (Google DeepMind, vB)","name_zh":"Barkour 敏捷四足机器人（Google DeepMind，vB 版）","goal":"quadruped","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"not published","cost_note":"The creators give no cost: the BOM (hardware/barkour_robot_bill_of_materials.csv) lists parts, specs, quantities and sources without prices, and most structural parts and all 11 custom boards are marked Custom Order","guide_steps":191,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":55,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices cost.cost guide.video","license":"Apache-2.0（全部软件：电机驱动固件、EtherCAT 主机代码）· CC BY-NC 4.0（其余材料：CAD、电路板设计、文档与图片，禁止商用）· MuJoCo 模型 Apache-2.0","hardware_license":"CC BY-NC 4.0","software_license":"Apache-2.0","project_url":"https://github.com/google-deepmind/barkour_robot","botedu_url":"https://botedu.ai/en/builds/barkour"},{"id":"d1-quadruped","name_en":"NavBot-D1 open-source quadruped robot dog","name_zh":"NavBot-D1 开源四足机器狗","goal":"quadruped","level":"advanced","kind":"open-hardware","cost_amount":4999,"cost_currency":"USD","cost_basis":"product","cost_note":"$4,999 for the assembled robot (NavBot's official store, read 2026‑11‑03 in US dollars), including the assembled and calibrated robot, battery packs and charger, with international shipping calculated at checkout and tax not stated. The creator's BOM (bom/BOM.xlsx) totals $4,249.36, of which the 12 DM‑6248P motors are $2,082 and the CNC parts for four legs $764; the BOM lists no 3D-printed parts, BMS board or wiring and excludes shipping","guide_steps":132,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":80,"ready_to_build":"yes","score_gaps":"parts.prices guide.video parts.shops","license":"GPL-3.0（D1 硬件仓库：STEP、图纸、STL、BOM、BMS 电路板与固件）· Apache-2.0（D1_rl_sar 内的 rl_sar 框架；该仓库无许可证文件）· CC BY-NC-SA 4.0（D1_HIMLoco，禁止商用）· BSD-3-Clause（D1_Legged_mpc_amp）","hardware_license":"GPL-3.0","software_license":"GPL-3.0","project_url":"https://github.com/NavBotHub/D1","botedu_url":"https://botedu.ai/en/builds/d1-quadruped"},{"id":"mujina","name_en":"Mujina (ムジナ) research-and-development quadruped","name_zh":"Mujina（ムジナ）研究开发用四足机器人","goal":"quadruped","level":"advanced","kind":"open-hardware","cost_amount":"","cost_currency":"","cost_basis":"request","cost_note":"No published price: RT's press release says Mujina has been made to order since iREX 2025, with pricing through its sales team (sales@rt-net.jp); RT's web store ai.rt-shop.jp does not list it (2026‑11‑03). The repo has no BOM and the creators give no build cost","guide_steps":63,"guide_stages":"assemble calibrate software source","parts_price_regions":"","score":65,"ready_to_build":"no","score_gaps":"files.print parts.prices cost.cost guide.video","license":"CC BY-SA 4.0（Mujina_Hardware：整机 STEP、装配说明与照片）· MIT（mujina_ros、mujina_isaac_lab、RT 的 IMU 固件）","hardware_license":"CC BY-SA 4.0","software_license":"MIT","project_url":"https://github.com/rt-net/Mujina_Hardware","botedu_url":"https://botedu.ai/en/builds/mujina"},{"id":"panthera-ht","name_en":"Panthera-HT open-source 6-axis robot arm","name_zh":"Panthera-HT 开源六轴机械臂","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":1799,"cost_currency":"USD","cost_basis":"product","cost_note":"The assembled arm is $1,799 in the official store (store.hightorque.cn, 2026‑11‑03, with no word on tax or shipping). For a self-build, BOM.xlsx lists only part numbers, quantities, materials and Taobao / Tmall links, with no prices or total","guide_steps":85,"guide_stages":"assemble calibrate print software source use","parts_price_regions":"","score":65,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices parts.shops","license":"MIT（Panthera-HT_Model：SolidWorks、STEP 与 BOM）· MIT（Panthera-HT_SDK、ROS 2、LeRobot、网页上位机与 RoboTwin 仓库）· 未声明许可证（Panthera_HT_SDK_Extensions、Panthera_digital_twin）","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/HighTorque-Robotics/Panthera-HT_Main","botedu_url":"https://botedu.ai/en/builds/panthera-ht"},{"id":"manuel-arm","name_en":"Manuel 1.0 (open-source human-arm-scale robot arm)","name_zh":"Manuel 1.0 人臂尺度开源机械臂","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":2309.72,"cost_currency":"USD","cost_basis":"bom","cost_note":"The creator's README BOM totals $2,309.72 (US retail, excluding taxes and shipping, which the creator says vary by location), of which servos and electronics are $2,020.61, with $27.98 of PLA filament included; the 3D printer and tools are not included, and there is no official kit price","guide_steps":58,"guide_stages":"assemble calibrate data print software source use","parts_price_regions":"","score":85,"ready_to_build":"yes","score_gaps":"guide.pictures guide.video parts.shops","license":"MIT（仓库：STL/STEP 模型、URDF 与 Python 示例代码）· Apache-2.0（Robotis Dynamixel SDK）","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/mattweidman/Manuel-1.0","botedu_url":"https://botedu.ai/en/builds/manuel-arm"},{"id":"cm6-cobot","name_en":"CM6 compliant 3D-printed cobot arm","name_zh":"CM6 柔顺 3D 打印协作机械臂","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":1000,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The creator's estimate: about $1,000 in raw materials for the first version (V1), with a later version possibly down to $700–800 (Hackaday and the assembly PDF); the V2 BOM carries no prices or total. The official store sells no CM6 kit, only parts such as the drivers: the Spectral Micro BLDC driver was €85.68 including VAT in the German market on 2026‑11‑03 (€72 in the Singapore market)","guide_steps":84,"guide_stages":"assemble calibrate data software source","parts_price_regions":"","score":61,"ready_to_build":"no","score_gaps":"files.print files.cad parts.prices guide.video","license":"MIT（CM6_COBOT_ROBOT：STEP、物料表、装配说明与 V2 代码）· MIT（V1 GUI，CM6_control_software）· GPL-3.0（Spectral Micro 无刷驱动板仓库）","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/Source-Robotics/CM6_COBOT_ROBOT","botedu_url":"https://botedu.ai/en/builds/cm6-cobot"},{"id":"sawppy","name_en":"Sawppy the Rover","name_zh":"Sawppy 火星车（Sawppy the Rover）","goal":"mobile","level":"advanced","kind":"open-hardware","cost_amount":500,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The creator's $500 budget chart (US dollars at rough US prices, meant only as a guideline; bargain hunters may get closer to $400 and parts can cost significantly more outside the US): Raspberry Pi 3 with microSD card, case and 5V regulator $50, ten LX‑16A servos $150, USB servo board $10, misc electronics $20, battery $25, 3 kg of filament $75, Misumi cut extrusions $45, 8 mm shafts $10, 608 bearings $20, turnbuckles $10, misc hardware $75, laser-cut acrylic $10. The target is a basic rolling chassis; the chart leaves out the 3D printer, tools, a battery charger and shipping, and was last revised in 2019‑03","guide_steps":148,"guide_stages":"assemble calibrate print software source","parts_price_regions":"","score":78,"ready_to_build":"no","score_gaps":"files.cad parts.prices","license":"MIT（整个仓库：STL、文档与代码，版权 2018 Roger Cheng）· 控制软件 SGVHAK_Rover 同为 MIT","hardware_license":"MIT","software_license":"MIT","project_url":"https://github.com/Roger-random/Sawppy_Rover","botedu_url":"https://botedu.ai/en/builds/sawppy"},{"id":"faze4","name_en":"Faze4 3D-printed 6-axis arm with cycloidal gearboxes","name_zh":"Faze4 3D 打印摆线减速六轴机械臂","goal":"manipulation","level":"advanced","kind":"open-hardware","cost_amount":1000,"cost_currency":"USD","cost_basis":"estimate","cost_note":"The creator's estimate: under $1,000 for the whole arm in the README and official video, about $1,000 on Hackaday and about $1,000–1,500 in the docs, none saying what is included; the BOM carries no prices. The official store sells no kit, only the STEP files (€23 in the collector's Singapore market on 2026‑11‑04)","guide_steps":107,"guide_stages":"assemble calibrate print software source","parts_price_regions":"","score":70,"ready_to_build":"no","score_gaps":"files.print parts.prices parts.shops licence.software","license":"CERN-OHL-S-2.0（仓库 LICENSE 文件，2025‑09 起）· README 与官方店仍写 MIT · 整机 STEP 文件不开源（官方店出售）","hardware_license":"CERN-OHL-S-2.0","software_license":"","project_url":"https://github.com/Source-Robotics/Faze4-Robotic-arm","botedu_url":"https://botedu.ai/en/builds/faze4"},{"id":"mevius","name_en":"MEVIUS sheet-metal welded quadruped","name_zh":"MEVIUS 钣金焊接金属四足机器人","goal":"quadruped","level":"advanced","kind":"open-hardware","cost_amount":12390.09,"cost_currency":"USD","cost_basis":"bom","cost_note":"The creator's parts list (a Google Sheet, yen with US-dollar conversions): the standard build totals $12,390.09, of which the 12 AK70-10s are JP¥69,846 ($498.90) each, $5,986.80 in all, and the meviy sheet-metal and machined parts $3,179.81 (optional limit parts another $320.25); the low-price build totals $5,304.11 (cheaper motors, computer, CAN-USB and IMU, and no wireless E-stop). Neither includes screws, printing filament or shipping. RT's made-to-order version is priced on request (2026‑11‑04)","guide_steps":27,"guide_stages":"assemble calibrate data software source use","parts_price_regions":"","score":75,"ready_to_build":"no","score_gaps":"files.print files.cad licence.hardware","license":"MIT（mevius 仓库：ROS 包、脚本、URDF/MuJoCo 模型与策略）· Google Drive 上的 STEP、STL 与物料表未写许可证","hardware_license":"","software_license":"MIT","project_url":"https://github.com/haraduka/mevius","botedu_url":"https://botedu.ai/en/builds/mevius"}]}